Oberdorfer Engine Water Pump - 1/2"-14 NPT Ports - OBN202M-908

Oberdorfer Engine Water Pump model N202M-908 will fit Universal brand engines with the following model numbers: M-12, M-18, M20, M-25, M-25XP, M30, M40, M50. Suction lift of 15 ft. is possible when the impeller is wet and the pump is fully primed. Rubber impeller is suitable for pumping fresh and salt water and mild chemicals. Do not pump gasoline, severe solvents or acids with a rubber impeller. When possible, flush pump with fresh water after each use.

Features:

• Applications: Universal brand engines between 10 and 44 HP
• Rubber impeller - Not suitable for use with gasoline, severe solvents or acids
• Bronze, corrosion resistant body
• High chrome nickel stainless steel shaft
• Clamped flange mounting allows mounting in positions 360°
• 2 separate seals: main pump and flange mounting
• Male tang drive
• Must be primed prior to initial start-up to avoid dry-running impeller
• Suction lift of 15 ft. is possible when impeller is wet and pump fully primed
• Impeller easily replaced without removing pump from engine
• Machined-in cam
• Replaces G908, 302837, 42175, 302648
• "Up" direction in and out ports
• Convenient drain plug

Click Here for Information