Item #867451

Go Power Pure Sine Wave Inverter - 200W - GP-ISW200-12

$175.99
Want an email once available?
Buy with

Image of : Go Power Pure Sine Wave Inverter - 200W - GP-ISW200-12 Go Power Pure Sine Wave Inverter - 200W - GP-ISW200-12 Item # 867451

Description

Go Power GP-ISW200-12 Pure Sine Inverter provides premium mobile power in a sleek, lightweight profile. It produces an exact replica of AC power for optimal performance. This inverter outputs 200W (continuous) and is a good choice for small, sensitive electronics.

Features:

  • Bring reliable, UL-certified power on the road with Go Power!'s Industrial Pure Sine Wave Inverter
  • Produces an exact replica of AC power for optimal performance
  • Runs any device in wattage range without interference
  • Durable, low profile design
  • Powersave mode
  • Dual GFCI outlets
  • Wide voltage range
  • Full overload protection

Mounting Notes:

  • Make sure the GP-ISW200 is installed in a location where the normal air temperature is between -20° C and 40° C. The cooler the better within this range
  • Do not allow water or other fluids to come into contact with the GP-ISW. Do not expose to rain, snow or water

Specifications:

  • Input:
    • Voltage: 12V DC
    • Voltage Range: 10.0 - 16.0V DC
    • No Load Current: < 0.5 Amp
    • Power Saving Mode: < 0.12 Amp
    • Efficiency: (Typ.) 89%
    • On Mode @ Save Mode: < 0.12 Amp
    • On Mode @ No Load Mode: < 0.5 Amp
  • Output
    • Continuous Output Power: 200W
    • Over Rated Power: (3 Min.) 230W
    • Surge Power: 250W
    • Frequency: 50 / 60 Hz ± 0.5% (Dip Switch Selectable)
    • Output Voltage: 100 / 110 / 115 / 120V AC ± 5% (Dip Switch Selectable)
    • Short-Circuit Protection: 2 seconds and restart 3 times shutdown
    • Output: Waveform Pure Sine Wave (THD < 3% @ Normal Load)
  • Protection
    • Input Over-Voltage Protection: 16.0V DC ± 3%
    • Input Under-Voltage Protection: 10.0V DC ±
    • BAT. Low Shutdown: 10.0V DC ± 3%
    • BAT. Low Alarm: 10.5V DC ± 3%
    • BAT. Low Restart: 12.5V DC ± 3% 2
    • BAT. High Alarm: 15.5V DC ± 3%
    • BAT. High Shutdown: 16.0V DC ± 3%
    • BAT. High Restart: 14.5V DC ± 3%
  • Environment
    • Working Temp.: -20° C - 60° C
    • Storage Temp.: -30° C - 70° C
    • Working Humidity: 10~95% RH, non condensing
  • Safety & EMC Safety Standards
    • EMC standards: Certified FCC class B
  • Dimension (WxHxD): 150 mm x 68mm x 187 mm
  • Weight: 1.6kg
  • Remote Control: CR-8 (Optional - Sold Separately)
  • Cooling: Temperature & Load Controlled cooling Fan

In the Box:

  • Go Power GP-ISW200-12 Pure Sine Inverter
  • 2 x Ring terminals

Product Data Sheet (1.72 MB)

Owner's Manual and Installation Guide (2.85 MB)

Part Numbers for Go Power Pure Sine Wave Inverter - 200W - GP-ISW200-12

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 40.55ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.15ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;