Adler Barbour Super ColdMachine CU-200 Condensing Unit - 755410000

Performance, efficiency, and quality are hallmarks of the Adler/Barbour ColdMachine Kits by Dometic. The Adler/Barbour ColdMachine CU-200 Condensing Unit is air or water cooled , provides up to 15 cu. ft. of refrigeration and works with a variety of 100-Series evaporators.

Features:

• Air or water cooled condensing unit
• 12/24 Volt DC
• Powered by a SeCOP BD50F compressor
  • SeCOP BD50F compressor provides 25% more cooling performance
• Easy-to-install unit
• Oversized air condenser
• Provide up to 15 cu. ft. (424 liters) of refrigeration and work with a variety of 100-Series evaporators
• Optimal performance in warmer waters
  • ColdMachines are specially designed to survive the rigors of the harsh marine environment, and to provide exceptional performance in hot and humid conditions, erratic or low voltage, and continuous use
• Stainless-steel construction
• Shrouded forced-air condensers
• High-CFM fan
• Modular phone-jack connection for thermostat
• Built-in troubleshooting diagnostics
• Environmentally safe R-134A refrigerant
• Can be installed up to 15 ft. (4.57 m) from evaporator
• Pre-charged and ready to install
• ColdMachine kits now come with self-sealing quick-connect fittings for easy attachment
  • Unlike the old "one-shot" connections, quick-connect fittings can be disconnected and reconnected whenever necessary without loss of refrigerant or exposing the system to air or moisture
  • Dometic also offers Quick-Connect Adapters (755570000 Sold Separately) which join "oneshot" units to their quick-connect counterparts
    • Quick-Connect Adapters Require Professional Installation

Adler/Barbour SuperColdMachine CU-200 Specifications:

• Air Cooled
  • Fan-Air/Water Cooled
• Maximum Volume: 15 Cubic Feet
• Applications: Tropical Water Boating
• Designed for VD Series Evaporators
• Power: 12/24 Volt DC
• Draw: Varies
• Dimensions: 10.0" W x 7.5" H x 11.1" D (254 x 190 x 281 mm)

CoolMatic SuperColdMachine CU-200 Compatible Evaporating Units:

• VD-150 - Capacity: 9.0 cu ft, Closed Evaporator (10.5" W x 11.0" D x 6.0" H)
• VD-151 - Capacity: 9.0 cu ft, Closed Evaporator with Door (10.75" W x 7.0" D x 11.25" H)
• VD-152 - Capacity: 15.0 cu ft, Closed Evaporator (15.0" W x 12.0" D x 6" H)
• VD-153 - Capacity: 15.0 cu ft, Closed Evaporator with Door (15.5" W x 7.5" D x 12.0" H)
• VD-160 - Capacity: 4.0 cu ft, Power Plate with Holdover Capabilities (19.0" W x 11.25" D x 1.25" H)

Note: Optional Water Cooling Kit (C8350 Sold Separately)

• Simplify water cooling installation for your CU-200 SuperColdMachine
• Pump draws less than 1A and must be plumbed to a seawater source for operation
• Kit includes
  • 12 Volt DC water pump with mounting bracket
  • 5 Feet of 5/8". hose
  • 10 Feet of 3/8" hose
  • Hose clamps
  • Seawater strainer
  • 5/8" Plastic through-hull discharge fitting
  • Wiring diagram and mounting screws

Click Here to See More Information about the CU-200 Click Here to See Installation Manual for the OPTIONAL Water Cooling Kit

Click Here to See Installation Manual for the OPTIONAL Water Cooling Kit