Xantrex Freedom SW Pure Sine Wave Power Inverter/Charger

Features:

• Pure sine wave output to operate sensitive electronics
• Advanced configuration options for customized applications
• Parallel and series stacking capability
• The built-in transfer switch automatically transfers between inverter power and incoming AC power
• Power factor corrected, multi-stage charger for fast, efficient charging
• Temperature-compensated charging for a variety of climate conditions
• The ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power
• Conformal coated circuit boards for humid environments
• Ability to charge batteries drained to extremely low voltage

General Specifications:

• Compatible Battery Types: LiFePO4 / Flooded / gel / AGM
• Transfer Relay Rating: 1 leg of 30A (2000W), 2 legs at 30A each (3000W)
• Transfer Time (AC to inverter and inverter to AC): < 20 ms
• Optimal Operating Temperature Range (2000W/12V, 2000W/24V, 3000W/12V, 3000W/24V): – 4°F to 140°F (- 20°C to 60°C), – 4°F to 140°F (- 20°C to 60°C), – 4°F to 86°F (- 20°C to 30°C), – 4°F to 104°F (- 20°C to 40°C)
• Storage Ambient Temperature Range: – 40°F to 185°F (- 40°C to 85°C)
• Dimensions (12V, 24V): 7.75 x 13.5 x 15.25" (197 x 343 x 387 mm), 11.8 x 17.1 x 20.5" (300 x 435 x 522 mm)
• Net Weight: 60.5 lbs (27.5 kg)

2000W Electrical Specifications – Inverter:

• Output Power (continuous at 40°C): 2000W
• Surge Rating (5 seconds): 4000W
• Peak Output Current: 50A
• Output Frequency: 60 Hz +/- 0.2 Hz
• Output Voltage: 120V AC
• Output Wave Form: True sine wave
• Optimal Efficiency: 94%
• No-Load Power Draw (inverting): <1.5A DC
• Input DC Voltage Range: 10 - 16V DC (12V), 20 - 32V DC (24V)
• AC Connections: Single phase in/out

3000W Electrical Specifications – Inverter:

• Output Power (continuous at 40°C): 3000W
• Surge Rating (5 seconds): 6000W
• Peak Output Current: 75A
• Output Frequency: 60 Hz +/- 0.2 Hz
• Output Voltage: 120V AC
• Output Wave Form: True sine wave
• Optimal Efficiency: 94%
• No-Load Power Draw (inverting): <1.5A DC
• Input DC Voltage Range: 10 - 16V DC (12V), 20 - 32V DC (24V)
• AC Connections: Split phase in/dual out

2000W Electrical Specifications – Battery Charger:

• Output Current (continuous at 25°C): 100A (12V), 50A (24V)
• Output Voltage: 12V DC, 24V DC
• Output Voltage Range: 5 – 16V DC (12V), 12 – 32V DC (24V)
• Charge Control: 3 stage with manual equalize
• Charge Temperature Compensation: Remote battery sensor (included)
• Optmial Efficiency: > 85%
• AC Input Power Factor (maximum charge): 0.98 typical
• Input Current (for maximum charging): 16A rms nominal (12V), 15.8A rms nominal (24V)
• Input AC Voltage: 120V AC
• Input AC Voltage Range: 85 – 140V AC
• Dead Battery Charge: > 5V DC (12V), > 12V DC (24V)

3000W Electrical Specifications – Battery Charger:

• Output Current (continuous at 25°C): 150A (12V), 75A (24V)
• Output Voltage: 12V DC, 24V DC
• Output Voltage Range: 5 – 16V DC, 12 – 32V DC
• Charge Control: 3 stage with manual equalize
• Charge Temperature Compensation: Remote battery sensor (included)
• Optmial Efficiency: > 85%
• AC Input Power Factor (maximum charge): 0.98 typical
• Input Current (for maximum charging): 24A rms nominal (12V), 22A rms nominal (24V)
• Input AC Voltage: 120V AC
• Input AC Voltage range: 85 – 140V AC
• Dead Battery Charge: > 5V DC (12V), > 12V DC (24V)

Note: AC source must be split phase, requires stacking cable (Xantrex part no. 808-9005)

Data Sheet

Xantrex Freedom SW 2012 Pure Sine Wave Power Inverter / Charger Product Data Sheet