Victron Energy LiFePO4 VE.Bus BMS V2 Battery - 12-48V DC - BMS300200200

The VE.Bus BMS and VE.Bus BMS V2 is Battery Management System (BMS) designed to interface with and protect a single or multiple Victron Energy Lithium Battery 12.8V & 25.6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against the over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

Features:

• Remote on/off terminals
• Ability to disable VE.Direct and VE.Can solar chargers via a GX device
• Control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device
• Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown
• Based on the status of the battery or batteries, the BMS will:
  • Generate a pre-alarm signal to alert of an imminent cell under voltage conditions
  • Disable inverting in VE.Bus inverters or inverters/chargers via VE.Bus, and disable other loads via the 'Load Disconnect' terminal in the event of a cell under voltage conditions
  • Disable charging in VE.Bus inverters or inverters/chargers via VE.Bus and disable other chargers via the 'Charge Disconnect' terminal in the event of a cell overvoltage, under-temperature, or over-temperature conditions
  • The "original" VE.Bus BMS is best used in systems without a GX device

Datasheet