Victron Energy IP22 Dry Mount Blue Smart Charger - 12V DC

The Blue Smart IP22 Charger is the professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles such as cars, motorbikes, boats and camper-vans.

Features:

• Wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available
• With up to 94% efficiency, this charger generates up to four times less heat when compared to the industry standard
  • Once the battery is fully charged, power consumption reduces to 0.5W, some five to ten times better than the industry standard
• Adaptive 6-stage charge algorithm: test - bulk - absorption - recondition - float - storage
• Microprocessor-controlled 'adaptive' battery management automatically optimizes the charging process relative to the way the battery is being used
• Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours
  • In the storage mode, float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates
  • Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure
• Li-ion batteries are charged with a simple bulk - absorption - float algorithm
• Initiates charging even if the battery has been discharged to zero volts - will reconnect to a fully discharged Li-ion battery with internal disconnect function
• When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless

Datasheet