Item #969235

Victron Energy GX Tank 140 System Monitoring - BPP920140100

51 Review
$98.60
Want an email once available?
Buy with
Need Help? Speak to an Outfitting Specialist [email protected] 1-800-262-8727 MON-FRI 9AM-5:30PM SAT 9AM-5PM

Image of : Victron Energy GX Tank 140 System Monitoring - BPP920140100 Victron Energy GX Tank 140 System Monitoring - BPP920140100 Item # 969235

Description

The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.

Features:

  • Tank levels can be read out locally in the system, as well remotely through our VRM Portal
  • Compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10V)
    • Connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required
  • Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24V power supply, to power the sender
    • The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that
  • Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5V
  • To provide a stable reading, the readings are averaged damping - the damping can be configured between 1 and 60 seconds
  • Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range
  • For marine applications, the GX Device can transmit tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD

Brochure (1.65 MB)

WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.

Part Numbers for Victron Energy GX Tank 140 System Monitoring - BPP920140100

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 70.7ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

What are the best choices of resistive sensors to work with the GX 140 System Monitoring. 

Asked by: Sanebel
The GX 140 Interfaces with either 4 to 20mA or 0 to 10V tank level sensors (including a combination of both) not with resistive senders.
Answered by: Upwind
Date published: 2025-01-29
  • y_2025, m_6, d_21, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_CM1708294, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_defendermarine
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 58.38ms
  • QUESTIONS, PRODUCT