Victron Energy Smart BatteryProtect - 6-35V DC
$53.55 - $105.40
Victron Energy Smart BatteryProtect - 6-35V DC Item # 969369
Description
Victron Energy's 6-35V DC Smart BatteryProtect protects the battery against excessive discharge and can be used as a system on/off switch. The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
Features:
- Automatically detects system voltage - 12/24V auto ranging
- Programming made easy when using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set
- A special setting for Li-ion batteries - in this mode the BatteryProtect can be controlled by the VE.Bus BMS
- Ultra-low current consumption
- Over voltage protection to prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V
- Ignition proof no relays but MOSFET switches, and therefore no sparks
- Delayed alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds
- Starting the engine will therefore not activate the alarm
- The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA
- Alarm output is typically used to activate a buzzer, LED or relay
- The load will be disconnected 90 seconds after the battery voltage drops below the preset level
- If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected