Taylor Made Stainless Steel Flag Pole

Taylor Made's Flag Pole provides a highly polished and durable stainless steel construction, for use in holding a flag taut so it will never tangle.

Features:

• Highly polished stainless steel from top to bottom
• Finial and base are cast from 1" diameter 304 stainless steel
• Unique flag clips are cast from 304 stainless steel which holds your flag taut so your flag is never tangled
• Holds your flag taut so your flag is never tangled (flag sold separately)

Selecting a Flag:

• Although flags come in standardized sizes, there are guidelines to help you select the proper size for your boat
• The size of a nautical flag is determined by the size of the boat that flies it
• Flags are more often too small than too large
• So in the rules below, round upward to the nearest larger standard size
  • The flag at the stern of your boat: U.S. ensign or national flag should be about one inch for each foot of overall length
    • For example, on a 40ft. boat, the ensign should be 40 in. i.e. about 3.5ft
  • Other flags, such as club burgees, private signals and courtesy flags for use on sailboats, should be approximately 1/2 inch for each foot of the highest mast above the water.
    • For example, on a 30ft. boat, with 50ft. between the masthead and the water, the burgee should be about 25 in. i.e. about 2 ft
  • The shape and proportions of pennants and burgees will be prescribed by the organization which they relate to

Specifications:

• Select pole length
• Select recommended flag size (flag sold separately)
• Base: 1" Diameter
• Angle: 60 Degrees
• Material: Cast 304 stainless steel base
• Mount is included