Star Brite Snappy 2-Part Teak Cleaner and Restorer Kit with Brushes - STN-Qkit

Snappy Teak-Nu is an easy to use one part of a two-part teak cleaner and restorer process.

Features:

• Please use both steps with Teak-Nu #1 and Teak-Nu #2 as the chemical reaction between the two products is what leaves teak looking brand new
• Function: Removes gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
• No hard scrubbing or bronze wool required
• Will not soften deck seams
• Avoid contact with painted or varnished surfaces
• Made in the USA
• Container size: (1) 32 oz step 1 and (1) 32 oz step 2

Directions:

Badly soiled, oiled or coated teak:

• Wear protective gloves
• Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck
• Use a bristle brush to spread evenly across area to be treated
• When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood
• Avoid contact with painted or varnished surfaces
• Rinse brushes after use
• Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt
• The treated area will lighten to a golden brown
• Rinse treated area thoroughly with water.

Lightly soiled teak:

• Wear protective gloves (Sold Separately)
• Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution
• Use bristle brush to spread evenly over area to be treated
• When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly
• Avoid contact with painted or varnished surfaces
• Rinse brushes thoroughly after use.
• Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area
• Use soft bristle brush to scrub lightly to attain a uniform light color
• Rinse treated area thoroughly
• When the treated area is completely dry, the deck will look like it has been freshly sanded

Helpful Suggestions:

• Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.
• To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.
• Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood