Sika Sikaflex-295 UV Marine UV Resistant Adhesive and Sealant

Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine industry. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).

Features:

• Excellent application properties
• Resistant to aging and weathering
• Suitable for organic glasses
• Approved for the OEM market
• Wheelmark approved

Specifications:

• Chemical Base: 1-component polyurethane
• Cure Mechanism: Moisture-curing
• Density (uncured): 1.3 kg/L (10.8 lbs/gal)
• Non-sag Properties: Good
• Application Temperature: 10 - 35°C (50 - 95°F)
• Skin Time: 60 minutes (23°C (73°F)/50% r.h.)
• Open Time: 45 minutes (23°C (73°F)/50% r.h.)
• Shrinkage: 1%
• Shore A Hardness: 35
• Tensile Strength: 2 MPa (290 psi)
• Elongation at Break: 500%
• Service Temperature: -50 to 90°C (-58 to 194°F)
• Shelf Life: 12 months (storage below 25°C (77°F))

Application

• Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships
• Because of its excellent weatherability this product can also be used to seal joints in exposed areas
• Suitable substrates are:
  • Aluminum (bright or anodized)
  • GRP (polyester resin)
  • Stainless steel
  • Timber
  • 2-component coatings
  • Plastic glazing materials (PC, PMMA)
• Seek manufacturer's advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking
• This product is suitable for experienced professional users only
• Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility

Product Data Sheet

Safety Data Sheet