Sea Hawk Talon Antifouling Paint

Talon is a copper-based, semi-hard hybrid ablative antifouling paint. Talon can be applied over most antifouling coatings and aggressively combats all types of fresh and salt water marine fouling.

Features:

• Value-priced semi-hard hybrid ablative antifouling
• 33.6% cuprous oxide – highest grade available
• Consistent viscosity providing better flow and rolling ability
• May be applied over other modified epoxy antifouling paints

Specifications:

• Finish/Sheen: Semi-Gloss
• Copper Content: 33.6% all colors (628 g/l)
• Volume Solids: 56% ± 2%
• Suitable for below the waterline only
• Water-Based: No
• Dry Time to Launch: 12 hours
• Components: 1
• Typical Film Thickness:
  • Pleasure craft: 2.5 mils (63.5 µ) dry film thickness (DFT) per coat, (4.5 mils (114.3 µ) wet film thickness (WFT)), 2 coats on entire hull and a 3rd at the waterline and other high wear areas
  • Commercial Marine: 3.0 - 5.0 mils (76.2-127 µ) DFT per coat by spray application (5.4 - 8.9 mils (137.16 - 226.06 µ) WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas
  • Theoretical Coverage: 359 sq. ft./Gal (33.35 m2) at 2.5 mils (63.5 µ) dry film thickness
  • Shelf Life: 30 months when stored under cool, dry conditions

Safety Data Sheet

Technical Data Sheet

Application Guidelines