Sea Hawk Cukote Antifouling Bottom Paint

Sea Hawk Cukote Antifouling Paint is a self-polishing copolymer antifoulant with a high loading of cuprous oxide. The formulation of this bottom paint makes it a top performer, even in the most severe fouling areas. As an ablative, self-polishing coating, there is no buildup of bottom paint over time.

Features:

• Self-polishing copolymer antifoulant
• High loading of cuprous oxide makes this formulation a top performer, even in the most severe fouling areas
• As an ablative, self-polishing coating, there is no buildup of bottom paint over time so the hull's underwater surface remains smooth and clean
• The copolymer can withstand removal from water without affecting its antifouling properties
• May be used on all steel, fiberglass, and wood vessels that have planned dry-dockings of less than 3 years
• Multi-season performance on pleasure craft, coastal and deep sea vessels
• Harder ablative finish makes Cukote ideal for fast moving vessels including pleasure craft power boats, high speed transports, supply vessels, and ferries
• Does not contain any Organotin compounds (TBT)
• Lloyd's Registry Certified
• Suitable for below the waterline only

Specifications:

• Finish/Sheen: Semi-Gloss
• Converter: One Pack
• Copper Content: 47.57% (1026 g/L) all colors
• Solids by Weight: 81% (±2%)
• Volume Solids: 54% (±2%)
• Flash Point: 100 °F (38 °C)
• VOC: 398 g/L
• Water-Based: No
• Dry Time to Launch: 12 hours
• Components: 1
• Typical Film Thickness:
  • Pleasure craft: 2.5 mils (63.5 µ) dry film thickness (DFT) per coat, (4.6 mils (116.84 µ) wet film thickness(WFT)), 2 coats on entire hull
  • Commercial Marine: 4.0 - 5.0 mils (101.6-127 µ) DFT per coat by spray application (7.4 - 9.3 mils (187.96 - 236.22 µ) WFT), 2 coats on entire hull

Application Guide

Data Sheet

Compatibility Chart

Safety Data Sheet