Shopping from Canada? 
Go to Defender Canada!
Rule
Rule Rule-Mate Automatic Submersible Bilge Pump
Item: #880198 | Part Number: Not Selected$199.99 - $296.99
Description
- Built-in solid-state water sensor eliminates the need for a float switch
- Automatic on at 2 3/4" and off at 5/8" water levels
- Flow sensor prevents continuous running if debris fouls the sensor
- Quick-release strainer and threaded discharge for easy maintenance
- Built-in thermal cut-off for added pump and vessel protection
Rule Rule-Mate Automatic Submersible Bilge Pump Item # 880198
Description
Rule-Mate's Automatic Bilge Pump is an all-in-one, eco-friendly pump and switch that features solid state water-sensing technology that eliminates the need for a separate float switch.
Features:
- Automatic activation when water reaches 2 3/4" (7 cm)
- Deactivation when the water level reaches 5/8" (1.6 cm)
- Flow (resistance) sensor prevents continuous running if water level sensor is fouled by debris, pump reverts to 2.5 minute cycle mode until the sensor is cleared
- Quick release inlet strainer allows rapid cleaning
- Built-In Thermal Cut-Off (TCO) provides added protection for pump and vessel
- Threaded Discharge - easier installation, easier maintenance
- For medium sized yachts and motor cruisers
- Rule Pumps carry a 3-year warranty from the date of purchase
1500 GPH (RM1500A) Specifications:
- Voltage: 12V DC
- Amperage: 4.8A
- Check valve: Yes
- Replacement strainer PN: 286
- Dimensions (H x W x D): 6" x 7.25" x 4.3" (152 x 185 x 109 mm)
- Hose diameter: 1" (25 mm) and 1 1/8" (29 mm)
- Use with panel switches - 41, 43, 45
2000 GPH (RM2000A) Specifications:
- Voltage: 12V DC
- Amperage: 12A
- Check valve: Yes
- Replacement strainer PN: 286
- Dimensions (H x W x D): 6" x 7.25" x 4.3" (152 x 185 x 109 mm)
- Hose diameter: 1" (25 mm) and 1 1/8" (29 mm)
- Use with panel switches - 41, 43, 45
2000 GPH (RM2000A-24) Specifications:
- Voltage: 24V DC
- Amperage: 4.0A
- Check valve: Yes
- Replacement strainer PN: 286
- Dimensions (H x W x D): 6" x 7.25" x 4.3" (152 x 185 x 109 mm)
- Hose diameter: 1" (25 mm) and 1 1/8" (29 mm)
- Use with panel switches - 41, 43, 45
Part Numbers for Rule Rule-Mate Automatic Submersible Bilge Pump
Videos
Videos
Reviews
Rated 5 out of
5
by
mrphill from
Rule pumps Rule!
Needed a direct replacement for a failed primary pump. This is an excellent automatic bilge pump. Almost a 1 for 1 match with the original pump. The basket is a little different with the internal tabs because of the updated internal float switch. The outflow is a little different - now the hose is barbed with a threaded connector to the pump. Wiring is the same. Removal and install took about 30 minutes, real simple. Defender came through with good pricing and shipping.
Date published: 2025-10-13
Questions
What’s the max amps for the 2,000 gph pump?
Please refer to Rule's instruction manual for specifications: https://defender.com/assets/pdf/rule/rule-mate-iom-950-0528a_rev_g.pdf
Date published: 2024-04-23