Shopping from Canada? 
Go to Defender Canada!
Rule
Rule Rule-A-Matic Bilge Pump Float Switch
Item: #880192 | Part Number: Not Selected$43.99 - $48.99
Description
- Activates pump at 2" water level and shuts off at 3/4"
- Mercury-free, long-life snap switch design
- Detachable base for easy installation and cleaning
- Marine-grade wiring with moisture-tight seals
Rule Rule-A-Matic Bilge Pump Float Switch Item # 880192
Description
Rule Rule-A-Matic® Float Switch
Features:
- Switch turns bilge pump on when water level reaches 2" – turns pump off when water level reaches 3/4"
- Detachable mounting base makes switch easier to install and remove for cleaning
- Environmentally friendly mercury-free design
- Patent-pending snap switch tested to over 1,000,000 cycles @ 12V DC
- Highly abrasion-resistant marine-grade blocked wire
- Exclusive moisture-tight seals
- Can also be used to operate high water alarm systems
- Simple manual test feature to check for obstructions
- Ignition protected
- 2-year warranty
Specifications:
- Nominal Voltage: 12 / 24 / 32V DC
- Max. Current Draw: 14A
- Wire Size: 16 AWG
- Wire Length: 28"
- Dimensions: 2-5/8" H x 1-3/4" W x 5" L
Part Numbers for Rule Rule-A-Matic Bilge Pump Float Switch
Videos
Videos
Reviews
Rated 5 out of
5
by
Sailor Shane from
Replacement float switch exact fit.
Exact replacement for original bought in 2012. Could use the same bracket which was glued in place. For bilge pump. Failed in the ”on” position.
Date published: 2026-01-02
Questions
Does this plug into pump or must it be wired?
It must be wired in. There is no plug. Just bare wires.
Date published: 2026-01-28