Reverso FPM-150 Fuel Polishing Module with Digital Timer
$1,551.99
Reverso FPM-150 Fuel Polishing Module with Digital Timer Item # 879321
Description
Reverso FPM-150 Fuel Polishing Module
Features:
- The only true Fuel Polishing Module available
- Just add the filter of your choice (Adaptable with any filter)
- Easy to install module, turns any filter into a comprehensive fuel polishing system
- Works with most standard filters
- Choose the filter that suits your needs. (e.g. Separ Filter, Racor, Fleetguard, Yamaha, Sierra, Baldwin, Cummins, Mallory, Dorman, Fram, etc.)
- Recommended for use with middle-distillate fuels and fuel oils
- Recommended for use with diesel, biodiesel, and kerosene (Not For Gasoline)
- Reverso recommends you turn the fuel (3) times for an initial cleaning
- Once in maintenance mode, you can perform this cleaning once a week
- Continuous use is not required
- Recommended Run Cycle = Volume of the Tank x 3 Flow Rate
- Water resistant enclosure
- Heavy duty gear pump (150 GPH)
- Digital timer
- Audio and visual alarm
- Automatic shut-off switch
- Water resistant aluminum enclosure
- Filter not included
- Can be installed on the inlet or outlet side of the filter
Specifications:
- Flow Rate: 2.6 GPM (10 LPH)
- Voltage: 12 VDC or 24 VDC
- Inlet Port: 1/2" Hose Barb
- Outlet Port: 1/2" Hose Barb
- Amp. Draw: 20A @ 12 VDC, 11A @ 24 VDC
- Circuit Breaker: 25A @ 12 VDC, 15A @ 24 VDC
- Self Priming: 5 ft (1.5 m) (wet gears)
- Maximim Lift: 10 ft (3 m) with foot valve
- Maximum Work Pressure: 50 psi / 3.5 bar
- Maximum Work Temperature: 140° F / 60° C
- Total discharge head not to exceed 30 ft
- Dimensions:
- 12" Width
- 8.7" Height
- 4.4" Depth