Shopping from Canada? 
Go to Defender Canada!
Raymarine
Raymarine SeaTalk 1 to SeaTalk ng Spur - A06073
Item: #879034 | Part Number: A06073$25.99
Description
The Raymarine SeaTalk 1 to SeaTalk ng Spur Cable A06073 provides a seamless connection between legacy SeaTalk 1 devices and modern SeaTalk ng networks. Designed for reliable marine performance, it enables integration of older Raymarine instruments with current systems, simplifying upgrades and expanding network capabilities.
Raymarine SeaTalk 1 to SeaTalk ng Spur - A06073 Item # 879034
Description
The Raymarine SeaTalk 1 to SeaTalk ng Spur Cable (A06073) connects SeaTalk 1 to SeaTalk ng devices.
Features:
- SeaTalk / SeaTalk 1 :
- Raymarine's proprietary network design released at the same time as NMEA 0183 that had several key advantages
- SeaTalk 1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk 1
- Data: A multi-talker, multi-listener approach using serial data at low data rates (4.8 Kbps)
- Cable System: The network used proprietary cables and connectors that were designed for the marine environment
- The connectors are three pin molded and incorporate 1/8" automotive spades as mating elements
- The network could be implemented as either a simple daisy chain structure or the more robust approaches of backbone/spur or star design
- Data: SeaTalk 1
- Length: 1 meter
Part Numbers for Raymarine SeaTalk 1 to SeaTalk ng Spur - A06073
Reviews
Rated 1 out of
5
by
Anonymous from
Information not provided with this product
The booklets provided with the i50/60 do not accuately discribe this product. The Seahawk adotor cable E22158, must be used with the NMEA0183 converter (the one with the yellow center connector) If you use this connector, 12vdc is provided to the bus and no additional 12 volt should be applied. If 12vdc is applied to the bus by other means, the seatalk converter cable (2 wire) must be used to transmit data and not 12vdc. Only one source of 12vdc can be applied. (These cables have been discontinued. There is a serious lack of installation information..
Date published: 2025-12-11
Rated 5 out of
5
by
John O from
Worked Great
Perfect for connecting to an older system, in my case an older autopilot
Date published: 2025-09-30
Questions
Is this cable bidirectional? Does data pass both ways, ie Seatalk hs to Seatalk1 as well as the opposite?
Yes, I used it on my old autopilot and was able to control it from the ST6001+, it would register the rudder position back with the movement of the helm, it would also provide the course which comes form the Computer unit.
Date published: 2025-04-08