Raymarine RSW Wired Smart Wind Transducer - E70670

The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30m Smart Wind mast cable as standard.

Features:

• Install and Go:
  • Raymarine Smart Wind technology delivers expert level accuracy without the need for additional, expensive processors or extensive calibration and set-up
• Finely Tuned:
  • Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the mast head is accurate and consistent
• Sail Smarter:
  • Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter

Specifications:

• Length:
  • Wind transducer (including cable): 657.762 mm (25.90")
  • Wind transducer (excluding cable): 540.712 mm (21.29")
  • Wired gateway: 155.61 mm (6.13")
• Width:
  • Wind transducer: 46.96 mm (1.85")
  • Wired gateway: 47.38 mm (1.88")
• Height:
  • Wind transducer: 305.86 mm (12.04")
  • Wired gateway: 30.61 mm (1.21")
• Nominal supply voltage: 12V DC (via SeaTalk NG)
• Operating voltage range: 9 - 16 V DC
• Power Consumption: < 100 mW
• Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5A fuse
• NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1
• Operating temperature range: -25°C to +55°C (-13°F to +131°F)
• Storage temperature range: -30°C to +70°C (-22°F to +158°F)
• Relative humidity:
  • Masthead: 100%
  • Below deck: up to 93% @ 40°C
• Waterproof rating:
  • Wind transducer: IPx6/IPx7
  • Wired gateway: IPx3
• Wind: 115 mph (185 kph)
• Vibration: EN 60945:2002 (exposed)

Included:

• (4) x No.10 x 3/4" self tapping screws (for mounting the wind transducer)
• (2) x No.7 x 3/4" self tapping screws (for mounting the gateway)
• 40 mm (1.57") heat shrink tube (required to insulate ground wire when shortening the mast cable)
• Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)
• Mast cable, 30 m (98.43') reel
• Documentation
• Wind transducer
• Smart wind wired gateway
• SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72")

Installation Instructions (1.98 MB)