Raymarine i60 Wind Instrument Display - E70061

The Raymarine E70061 i60 Wind Instrument Display is a full-featured analog / digital wind display for cruising and racing sailboats.

Features:

• Functions:
  • Apparent wind speed and direction
  • Beaufort
  • Max. wind speed
  • True wind speed and direction (requires SeaTalk speed through water data)
  • Velocity made good (VMG)
  • Tack
  • Alarms for high / low wind angle, low true wind speed and max. true wind speed
• Designed to complement Raymarine's new generation multifunction displays
• Large numerals and digits, red backlighting for outstanding visibility in all lighting conditions
• Excellent viewing angles and large push-button controls for ease of use at sea
• SeaTalk, SeaTalk ^ng and NMEA 2000-compatible interfaces
• Built-in transducer interface
• Low power consumption for longer battery life
• Multiple data source support eliminates potential data conflicts
• Front-mounted design for simple installation
• Same footprint as the older Raymarine ST60+ instrumentation
• Supplied with waterproof gasket for flush mounting
• 2-Year limited warranty (upgradable to 3 years upon product registration within 90 days of purchase)

Specifications:

• Display: Analog wind direction dial with digital wind speed display, red backlighting
• Nominal Voltage: 12V DC
• Operating Voltage: 10 - 16V DC
• Power Consumption (typical): Less than 1 W (display only) / 2.4 W max. with transducer connected
• Current Consumption: 45 to 65 mA (display only) / 200 mA max. with transducer connected
• Water Protection: IPX6 (protected against high-pressure water stream from any angle)
• Connections: 2 x SeaTalk ^ng and transducers / compatible with marine industry CAN systems
• Dimensions (W x H): 4.3" x 4.52"
• Cut-out for i60 Wind Display: 3.63" Dia
• Compatible Raymarine Transducers (sold separately):
  • Short-arm (14.5") forward wind transducer (E22078) with 100' cable
  • Long-arm (26") forward wind transducer (E22079) with 100' cable

Included:

• i60 Wind Display (E70061)
• SeaTalk ^ng blanking plug (A06032)
• Sun Cover (R22169)

Note: The i60 Wind Instrument was designed to support the same wind transducer that the ST60 Wind Instrument had been designed to support. Accordingly the wind transducers leads may simply be unplugged from the ST60 Wind Instrument and then plugged into the corresponding color coded terminals of the i60 Wind Instrument.