Raymarine Evolution EV-400 Power Vessel Autopilot Pack with p70Rs Control Head - T70162

The Raymarine Evolution EV-400 Power Vessel Autopilot Pack eliminates the need for complicated set up and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot.

General Features:

• Eliminates the need for complicated set up and calibration
• Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
• Suitable for large powerboats with hydraulic steering ram capacity 14.0 - 30.5 cu in
• Requires Type 2 or Type 3 Hydraulic Drive Unit (not included)

EV-1 Sensor Core Features:

• Designed for Evolution mechanical and hydraulic autopilot systems
• SeaTalk ^ng networking enables a single cable connection for power and data to the Evolution ACU-200 and extended SeaTalk ^ng and NMEA 2000 networks
• Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
• Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
• 9-Axis sensor monitors vessel motion in (3) dimensions
• Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
• Simple SeaTalk ^ng connectivity to control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
• Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
• Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays

p70Rs Control Head Features:

• 3.5" super bright, oversized LCD
• Optical bonding for brighter colors, sharper contrast, and fog-free operation
• Rotary controller for course changes and power steer mode
• Glass bridge design compliments Axiom-series chartplotters
• SeaTalkng networking for seamless connection to Raymarine and NMEA2000 networks
• Supplied with both black (Axiom style) & gunmetal (Series style) bezels and protective suncover

ACU-400 Actuator Control Unit Features:

• Delivers reliable autopilot drive power and provides power to the SeaTalk ^ng bus
• Supports Type 2 and 3 Raymarine hydraulic, linear and rotary mechanical drives
• Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor

EV-1 Sensor Core (E70096) Specifications:

• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 10.8 - 15.6V DC
• Power Consumption: 30 mA
• Sensors:
  • 3-Axis digital accelerometer
  • 3-Axis digital compass
  • 3-Axis gyro digital angular rate sensor
• Data Connections: SeaTalk ^ng
• Waterproof Rating: IPX6
• Dimensions (W x H x D): 5.5" x 5" x 5"

p70Rs Control Head Specifications:

• Waterproof Rating: IPX6, IPX7
• Relative Humidity: 93% Max.
• Standards: Europe 2004/108/EC, Australia and New Zealand C-Tick, compliance level 2
• Operating Voltage Range: 9V - 16V DC (protected up to 32 V DC)
• Current: 131 mA
• Nominal Supply Voltage: 12V DC
• Power Consumption: 1.57W
• LEN (NMEA 2000 Load Equivalency Number): 3
• Resolution: 320(H) x 240(V) pixels
• Size: 3.45" TFT LCD display
• Color: 16-bit color (64k colors)
• Brightness: 1,200 cd/m2
• Dimensions (W x H x D): 4.3" x 4.5" x 5.9" (110 x 115 x 151.6 mm)
• Connections: 1 x SeaTalkng® connector

ACU-400 Actuator Control Unit (E70100) Specifications:

• Drive Current Output: Max. continuous 30A
• Drive Clutch Output:
  • Up to 4A continuous at 12V DC on 12V DC systems
  • Up to 4A continuous at 24V DC on 24V DC systems
  • Up to 4A continuous at 12V DC on 24V DC systems
• Nominal Supply Voltage: 12 or 24V DC
• Operating Voltage Range: 10.8 - 31.2V DC
• Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24V DC
• Power Consumption (standby) - SeaTalk ^{ng :} 20 mA @ 12V DC
• Data Connections: SeaTalk ^ng
• Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground, digital input / output (DIO)
• Waterproof Rating(s): Drip resistant
• Dimensions (W x H x D): 11.2" x 8.3" x 2.5"

Included:

• EV-1 Sensor Core (E70096)
• p70Rs Control Head
• ACU-400 Actuator Control Unit (E70100)
• Rotary Rudder Reference Transducer (M81105)
• Evolution Cable Kit (R70160)
  • (1) SeaTalk ^ng power cable 1.3' (0.4 m)
  • (1) SeaTalk ^ng backbone cable 16.4' (5 m)
  • (1) SeaTalk ^ng spur cable 1.3' (0.4 m)
  • (1) SeaTalk ^ng 5-way connector block
  • (2) SeaTalk ^ng T-piece connector
  • (2) SeaTalk ^ng terminator

Brochure (3.63 MB)