Raymarine Evolution EV-200 Sailing Vessel Linear Autopilot Pack with P70S - T70158

The Raymarine Evolution EV-200 Sailing Vessel Linear Autopilot Pack with P70S, combines Raymarine's autopilot expertise, FLIR Systems' R&D, and advanced aerospace guidance technology to create Evolution Ai control algorithms that deliver a new level of accurate autopilot control.

General Features:

• Consists of a Type 1 mechanical linear drive that attatches to the rudder stock via an independant tiller arm below deck
• Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
• A separate control unit is installed where it is easy to see and reach
• Course computer and fluxgate compass are mounted separately for optimum performance
• Suitable for mechanically steered boats up to 24,000 lbs displacement

EV-1 Sensor Core Features:

• Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
• Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
• 9-Axis sensor monitors vessel motion in (3) dimensions
• Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
• Simple SeaTalk ^ng connectivity to control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
• Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
• Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays

P70S Control Head Features:

• Push-button controls designed for sailboats
• New LightHouse user interface is easy to learn and use
• Start-up wizard helps you configure the pilot quickly and easily
• Wide 160° horizontal and vertical viewing angles
• Advanced LED backlighting offers low power consumption, and delivers vibrant color and contrast
• Anti-reflective coating for improved visibility in bright sunlight
• Simple system and group dimming / illumination
• Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
• Support for multiple data sources
• SeaTalk ^ng/ NMEA 2000 and SeaTalk ¹ connectivity (no bridging required)

ACU-200 Actuator Control Unit Features:

• Delivers reliable autopilot drive power and provides power to the SeaTalk ^ng bus
• Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
• Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor

Type 1 Mechanical Linear Drive, 12V DC Features:

• Powerful thrust, fast hardover times and quiet operation
• Low backdrive force, to minimize the drive's effect on the boat's steering when the autopilot is in standby
• A powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox
• High performance for minimum current consumption

EV-1 Sensor Core (E70096) Specifications:

• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 10.8 - 15.6V DC
• Power Consumption: 30 mA
• Sensors:
  • 3-Axis digital accelerometer
  • 3-Axis digital compass
  • 3-Axis gyro digital angular rate sensor
• Data Connections: SeaTalk ^ng
• Waterproof Rating: IPX6
• Dimensions: 5.5" W x 5" H x 5" D

P70S Control Head Specifications:

• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 9 - 16V DC
• Power Consumption: 69 mA (no lighting) / 134 mA (100% illumination)
• Data Connections: SeaTalk ^ng (2) and SeaTalk ¹ Compatible
• Display Size: 3.5" TFT LCD / 320 x 240 pixels
• Waterproof Rating: IPX6
• Dimensions: 4.33" W x 4.52" H
• Flush Mount Cutout: 3.54" dia

ACU-200 Actuator Control Unit (E70099) Specifications:

• Drive Current Output: Max. continuous 7 Amp
• Drive Clutch Output: No clutch connection
• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 10.8 - 15.6V DC
• Power Consumption (standby) - Main Power Supply: 300 mA @ 12V DC
• Power Consumption (standby) - SeaTalk ^{ng :} No power supply to SeaTalk ^ng
• Data Connections: SeaTalk ^ng
• Connections: Rudder reference sensor, drive motor, ground
• Waterproof Rating(s): IPX6 (drive electronics) / IPX2 (connector panel)
• Dimensions: 7.1" W x 5.5" H x 2.0" D

Type 1 Mechanical Linear Drive, 12V DC (M81130) Specifications:

• Type 1 linear drive
• Mid stroke: 30.7"
• Operates: 12vdc
• Tiller arm radius: 9.8"
• Peak thrust: 650 lbs
• Max torque: 6500 lbs
• Hardover to hardover time: 11 sec
• Ave power consumption: 30 w

Package Includes:

• EV-1 Sensor Core (E70096)
• p70s Control Head
• ACU-200 Actuator Control Unit (E70099)
• Type 1 Mechanical Linear Drive, 12V DC (M81130)
• Evolution Cable Kit (R70160)
  • (1) SeaTalk ^ng power cable
  • (1) SeaTalk ^ng backbone cable
  • (1) SeaTalk ^ng spur cable
  • (1) SeaTalk ^ng 5-way connector block
  • (2) SeaTalk ^ng T-piece connector
  • (2) SeaTalk ^ng terminator

Brochure (3.63 MB)