Raymarine Evolution EV-200 Sailing Vessel Autopilot Pack with P70S Control Head - T70155

The Raymarine Evolution EV-200 Sailing Vessel Autopilot Pack w/ P70S Control Head is designed for mechanically steered, mid-sized sailboats.

General Features:

• Evolution autopilots eliminate the need for complicated setup and calibration once Evolution is installed, getting started is as easy as switching on the autopilot
• Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
• Suitable for mechanically steered mid-size sailboats with max. displacement of 24,000 lbs
• Requires Type 1 Mechanical Linear Drive (not included)

EV-1 Sensor Core Features:

• Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
• Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
• 9-Axis sensor monitors vessel motion in (3) dimensions
• Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
• Simple SeaTalk ^ng connectivity to control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
• Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
• Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays

P70S Control Head Features:

• Push-button operation control unit designed primarily for sailboats
• New LightHouse user interface is easy to learn and use
• Start-up wizard helps you configure the pilot quickly and easily
• Wide 160° horizontal and vertical viewing angles
• Advanced LED backlighting offers low power consumption, and delivers vibrant color and contrast
• Anti-reflective coating for improved visibility in bright sunlight
• Simple system and group dimming / illumination
• Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
• Support for multiple data sources
• SeaTalk ^ng NMEA 2000 and SeaTalk ¹ connectivity (no bridging required)

ACU-200 Actuator Control Unit Features:

• Delivers reliable autopilot drive power and provides power to the SeaTalk ^ng bus
• Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
• Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor

EV-1 Sensor Core (E70096) Specifications:

• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 10.8 - 15.6V DC
• Power Consumption: 30 mA
• Sensors:
  • 3-Axis digital accelerometer
  • 3-Axis digital compass
  • 3-Axis gyro digital angular rate sensor
• Data Connections: SeaTalk ^ng
• Waterproof Rating: IPX6
• Dimensions: 5.5" W x 5" H x 5" D

P70S Control Head (E70328) Specifications:

• Nominal Supply Voltage: 12V DC
• Operating Voltage Range: 9 - 16V DC
• Power Consumption: 1.6W
• Data Connections: SeaTalk ^ng (2) and SeaTalk ¹ Compatible
• Display Size: 3.5" TFT LCD / 320 x 240 pixels
• Waterproof Rating: IPX6
• Dimensions: 4.33" W x 4.52" H
• Flush Mount Cutout: 3.54" Dia

ACU-200 Actuator Control Unit (E70099) Specifications:

• Drive Current Output: Max. continuous 15A
• Drive Clutch Output: Up to 2.0A continuous, selectable between 12 / 24V DC
• Nominal Supply Voltage: 12 or 24V DC
• Operating Voltage Range: 10.8 - 31.2V DC
• Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24V DC
• Power Consumption (standby) - SeaTalk ^{ng :} 20 mA @ 12V DC
• Data Connections: SeaTalk ^ng
• Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground
• Waterproof Rating(s): Drip resistant
• Dimensions: 11.2" W x 8.3" H x 2.5" D

In the Box:

• EV-1 Sensor Core (E70096)
• P70S Control Head (E70328)
• ACU-200 Actuator Control Unit (E70099)
• Rotary Rudder Reference Transducer (M81105)
• Evolution Cable Kit (R70160)
  • (1) SeaTalk ^ng power cable (0.4 m)
  • (1) SeaTalk ^ng backbone cable (5 m)
  • (1) SeaTalk ^ng spur cable (0.4 m)
  • (1) SeaTalk ^ng 5-way connector block
  • (2) SeaTalk ^ng T-piece connector
  • (2) SeaTalk ^ng terminator

Note: Linear drive unit connects to rudder stock via an independent tiller arm

Brochure (3.63 MB)