Raymarine Evolution EV-100 Tiller Autopilot Pack

The EV-100 Tiller Pilot is a complete autopilot solution for tiller-steered sailboats. Designed for DIY installations, the EV-100 Tiller Pilot's externally mounted drive mounts in the cockpit, attached to the tiller. The EV-100 Tiller Pilot delivers precision autopilot control using the intelligent EV-1 sensor core and the ACU-100 actuator control unit.

In the Box (Complete Pack):

• EV-1 Sensor Core (E70096)
• ACU-100 Actuator Control Unit (E70098)
• P70S Control Head (E70328)
• Cockpit Tilller Drive (Q047)
• Evolution SeaTalkNG Cable Kit (R70160)
• Documentiation

Available Configurations:

• Complete Pack
• Pack without a P70S Control Head for use with a Raymarine Axiom Chartplotter's built-in pilot controls

Features:

• Rated for tiller-steered sailboats up to 13,200 lbs (6000 kg) displacement. Remember to always take your vessel's fully laden displacement weight into account (often 20% above the designed displacement)
• Designed for cockpit installations
• Tiller drive unit can be easily removed and stored
• SeaTalkNG/NMEA2000 for networking with sailing instruments and chartplotters
• Requires no complicated setup or autopilot calibration.

General Specifications:

• Nominal Supply Voltage: 12V DC
• Relative Humidity: Max. 93%
• Storage Temperature Range: -22°F to 158°F (-30°C to 70°C)

EV-1 Sensor Core Specifications:

• Dimensions (Dia. x D): 5.5 x 1.4" with mounting enclosure/3.8" with wall bracket (140 x 35/95 mm)
• Weight: 0.64 lbs (0.29 kg)
• Sensors: 3-axis digital accelerometer, 3-axis digital compass, 3-axis gyro digital angular rate sensor
• Waterproof Rating: IPx6
• Operating Temperature: -13°F to 131°F (-25°C to +55°C)
• Operating Voltage Range: 10.8 to 15.6V DC
• Power Consumption: 30mA
• LEN (NMEA 2000 Load Equivalency Number): 1

ACU-100 Specifications:

• Dimensions (W x H x D): 7.1" x 5.5" x 2.0" (180 x 140 x 52 mm)
• Weight: 1.32 lbs (0.6 kg)
• Waterproof Rating: Connector panel: IPx2, Drive electronics: IPx6
• Operating Temperature: -4°F to 131°F (-20°C to +55°C)
• Operating Voltage Range: 10.8 to 15.6V DC
• Power Consumption (Standby): 300mA
• Drive Current Output: Maximum continuous 7A at supply voltage
• LEN: 1
• Standards: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2

P70S Control Head Features:

• 3.45" super bright, TFT LCD
• Optical bonding for brighter colors, sharper contrast, and fog-free operation
• Dedicated one and ten-degree course change keys
• Wind vane steering mode with AutoTack control when combined with Raymarine wind instrument
• Glass bridge design compliments Axiom-series chartplotters
• SeaTalkng networking for seamless connection to Raymarine and NMEA2000 networks
• Supplied with both black (Axiom style) & gunmetal (Series style) bezels and protective suncover

P70S Specifications:

• Dimensions (W x H x D): 4.33" x 4.53" x 5.97" (including cable bend radius) (110 x 115 x 151.65 mm)
• Waterproof Rating: IPx6, IPx7
• Operating Temperature Range: -4°F to 131°F (-20°C to 55°C)
• Operating Voltage Range: 9 to 16V DC (protected up to 32V DC)
• Current: 131mA
• Power Consumption: 1.57W
• Resolution: 320 x 240p
• Color: 16-bit
• Brightness: 1,200 cd/m2
• Connections: 1 x SeaTalkNG connector
• LEN: 3
• Standards: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, compliance level 2

Tiller Drive Featrures:

• Fixed end of the tiller drive mounts to the boat's gunwhale, bench or coaming while the opposite end secures to the boat's tiller
• A robust electro-mechanical arm steers the tiller with the smoothness and precision of an experienced helmsman
• The included quick-disconnect system allows the tiller drive to be easily stowed away when not in use

Note: Depending on the configuration of your boat, additional installation accessories including pushrod extensions, tiller brackets, cantilever sockets and pedestal sockets may be required.

Brochure (3.63 MB)