Shopping from Canada? 
Go to Defender Canada!
Raymarine
Raymarine DST800 Nylon Thru-Hull Transducer (Speed, Depth, Temp) - A22154
Item: #878822 | Part Number: A22154$240.99
Description
The Raymarine DST800 Nylon Thru-Hull Transducer delivers reliable depth, speed, and temperature data for compatible Raymarine instruments. Designed for thru-hull mounting, it operates at 200 kHz for accurate readings and supports depths up to 330' (100 m). A dependable upgrade for ST60, ITC-5, and i50 systems.
Raymarine DST800 Nylon Thru-Hull Transducer (Speed, Depth, Temp) - A22154 Item # 878822
Description
The Raymarine DST800 is a nylon thru hull transducer for Raymarine instrument models ST60, ITC-5, I50. It provides depth, speed, and temperature data.
Features:
- For use with Raymarine instrument models: ST60, ITC-5, and I50
- Thru-hull mounting
- Transmits depth, speed, and temperature
- Produces 200 kHz frequency
- 13.7 Meter cable length
- Maximum depth: 330' (100 m)
Part Numbers for Raymarine DST800 Nylon Thru-Hull Transducer (Speed, Depth, Temp) - A22154
Reviews
Rated 5 out of
5
by
Sea Dancer from
Availability
You guys are the pinacle in marine supplies! Keep up your human contact. I don’t have to go thru 20 steps with AI to get my order😎
Date published: 2025-02-04
Questions
Compatible with Garmin Echomap.
This transducer is not compatible with Garmin Echomaps. For assistance with selecting a compatible transducer for your specific model of Echomap, please email us at [email protected]
Date published: 2025-05-13
Can you confirm it is compatible with ST60 tridata head - 3 wire depth. 5 wire speed?
I used this D/S/T sender with ST 60 instrument head. It replaced two separate sending units. Three wires for depth and 4 wires for speed and temp the 5th terminal was left empty. There is a difference in the in the through hull fitting with the new sending unit and I had to wait until haul out to change to the new one. The diameter is smaller on the old sending units.
Date published: 2025-07-30
Is this device NMEA 2000 compatible with Micro-C male plug?
Transducer comes with tinned wore ends and crimp spade terminals. You would need to order the NMEA 2000 version. If you order the NMEA 183 version you would need a translator like ITC5 or i50 multi display to converter signal to NMEA 2000.
Date published: 2025-07-21