Shopping from Canada? 
Go to Defender Canada!
Raymarine
Raymarine AIS700 Class B AIS Transceiver with Built-in Splitter - E70476
Item: #878667 | Part Number: E70476$1,075.99
Description
- Class B AIS transceiver with full transmit and receive capability
- Built-in VHF antenna splitter simplifies installation
- SO-TDMA networking for improved range and performance
- Compatible with NMEA 2000, NMEA 0183, SeaTalk ng, and PC systems
Raymarine AIS700 Class B AIS Transceiver with Built-in Splitter - E70476 Item # 878667
Description
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat's information too helping you to be seen on other vessels' systems
Features:
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA networking for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC and SeaTalk ng Compatible
- Software or hardware switchable Silent Mode for enhanced security when needed
Specifications:
- Supply voltage: 12V DC / 24V DC
- Operating voltage range: 9.6V DC to 31.2V DC
- Power consumption: <3W
- Fuse rating: 3 Amp
- LEN (Load Equivalency Number): 1
- Operating temperature range: -15° C to +55° C (+5° F to +131° F)
- Storage temperature range: -20° C to +75° C (-4° F to 167° F)
- Humidity: 93% at 40° C
- Waterproofing: IPx6, IPx7
- AIS Specifications
- Transmitter: (1)
- Receiver: (2)
- Operating frequency range (transmitting): 156.0MHz to 162.025 MHz
- Operating frequency range (receiving): 156.0MHz to 174.0 MHz
- Channel spacing: 25 KHz
- AIS performance: 5W SOTDMA
- GNSS receivers
- Channels: 72
- Cold start acquisition: 26 seconds (nominal)
- Position source: GPS, GLONASS
- External connections
- VHF antenna connector type: SO-239 co-axial
- VHF radio connector type SO-239 co-axial
- GNSS antenna connector type: 50Ω TNC co-axial
- SeaTalk ng/ NMEA 2000 connector type: 5-way DeviceNet male
- Power and NMEA 0183: 12-way bare ended wires
- NMEA 0183 port 1 (MFD connection): NMEA 0183 HS (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
- NMEA 0183 port 2 (Instrument connection): NMEA 0183 (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
- Power: 2-way bare ended wires
- Silent mode switch: 2-way bare ended wires
- USB: Micro-B
- Earth stud: Threaded stud (nut and washer supplied)
In the Box:
- Raymarine AIS700 Class B Automatic Identification System (AIS) Transceiver
- GNSS antenna
- GNSS antenna mounting hardware (3 x M3x40 stud and thumb nut)
- GNSS antenna gasket
- GNSS antenna pole mount
- Power/data cable 2 meter (6.56 ft)
- VHF Radio cable 1 meter (3.28 ft)
- DeviceNet to SeaTalk ng adaptor cable 1 meter (3.28 ft)
- Unit mounting hardware (4 x No.8x19 self tapping screws)
- M5 nut and washer (grounding)
- Documentation
- Software CD
Part Numbers for Raymarine AIS700 Class B AIS Transceiver with Built-in Splitter - E70476
Reviews
Rated 5 out of
5
by
WWalt from
AIS Installed
Very appreciative of folks at Defender! Raymarine AIS 700 was received programed, I connected up to system and worked great. I did not realize they actually programmed MMSI so I was ahead of the game and ready to set my course. Happy cruising!
Date published: 2026-04-24
Rated 5 out of
5
by
Anonymous from
overpriced
Althought twice the price of my AIS 650, this unit performs well and with an antenna relocation, my range of receiving doubled.
Date published: 2026-04-16
Rated 4 out of
5
by
Chuck from
AIS700 with splitter is a good value
AIS700 Class B AIS with built in splitter works well. It detected a high VSWR and we were able to isolate the problem to a poorly made connector on our boat. Also added a Digital Yacht multiplexer so AIS information can be used on tablets and cell phones running Navionics or Aqua Maps. Possibly the Garmin Cortex M-1 would be better because of integration of WiFi but the Raymarine has a lower price. Integrates easily with Raymarine backbone just try to plan what connectors you need as you order.
Date published: 2025-06-24
Rated 5 out of
5
by
Anonymous from
AIS - Defender added value
The order process was quick and easy. Defender configured the MMSI number within 1 day of my order and I received item shortly after that. Raymarine has very good documentation and products
Date published: 2025-05-12
Rated 5 out of
5
by
Mike from
Straightforward.
Programmed and shipped in a few hours.
Install couldn't be simpler.
Date published: 2024-10-31
Rated 5 out of
5
by
Anonymous from
Great team work!
Jennifer was great to work with. I needed a replacement unit right before leaving on a trip and she made it happen. The whole team was great to work with.
Date published: 2023-10-24
Questions
What is length of Female DeviceNet adapter cable? I need one longer than 1M.
Hello, for applications over 1 meter you would use the Raymarine Snap on adapter part #879079 and you can continue with a Seatalk ng cable.
Date published: 2024-04-03
Is pre-programed before shipment?
Yes, we will program the unit based on the MMSI or FCC License that you will be requested to submit and the AIS Data log that we will email you once the order is placed.
Date published: 2024-05-05
Does this require its own gps antenna and is it included?
Yes, and yes! You might need a mount for the GPS antenna, pending where you are going to install it.
Date published: 2025-06-30