Raymarine AIS700 Class B AIS Transceiver with Built-in Splitter - E70476

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat's information too helping you to be seen on other vessels' systems

Features:

• Full transmit and receive AIS for enhanced situational awareness and safety
• Latest SO-TDMA networking for longer range and faster performance
• Built-in antenna splitter simplifies installation with existing VHF radio antenna
• NMEA2000, NMEA0183, PC and SeaTalk ^ng Compatible
• Software or hardware switchable Silent Mode for enhanced security when needed

Specifications:

• Supply voltage: 12V DC / 24V DC
• Operating voltage range: 9.6V DC to 31.2V DC
• Power consumption: <3W
• Fuse rating: 3 Amp
• LEN (Load Equivalency Number): 1
• Operating temperature range: -15° C to +55° C (+5° F to +131° F)
• Storage temperature range: -20° C to +75° C (-4° F to 167° F)
• Humidity: 93% at 40° C
• Waterproofing: IPx6, IPx7
• AIS Specifications
  • Transmitter: (1)
  • Receiver: (2)
  • Operating frequency range (transmitting): 156.0MHz to 162.025 MHz
  • Operating frequency range (receiving): 156.0MHz to 174.0 MHz
  • Channel spacing: 25 KHz
  • AIS performance: 5W SOTDMA
• GNSS receivers
  • Channels: 72
  • Cold start acquisition: 26 seconds (nominal)
  • Position source: GPS, GLONASS
• External connections
  • VHF antenna connector type: SO-239 co-axial
  • VHF radio connector type SO-239 co-axial
  • GNSS antenna connector type: 50Ω TNC co-axial
  • SeaTalk ^ng/ NMEA 2000 connector type: 5-way DeviceNet male
  • Power and NMEA 0183: 12-way bare ended wires
  • NMEA 0183 port 1 (MFD connection): NMEA 0183 HS (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
  • NMEA 0183 port 2 (Instrument connection): NMEA 0183 (IEC 61162–1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signaling), configurable baud rate
• Power: 2-way bare ended wires
• Silent mode switch: 2-way bare ended wires
• USB: Micro-B
• Earth stud: Threaded stud (nut and washer supplied)

In the Box:

• Raymarine AIS700 Class B Automatic Identification System (AIS) Transceiver
• GNSS antenna
• GNSS antenna mounting hardware (3 x M3x40 stud and thumb nut)
• GNSS antenna gasket
• GNSS antenna pole mount
• Power/data cable 2 meter (6.56 ft)
• VHF Radio cable 1 meter (3.28 ft)
• DeviceNet to SeaTalk ^ng adaptor cable 1 meter (3.28 ft)
• Unit mounting hardware (4 x No.8x19 self tapping screws)
• M5 nut and washer (grounding)
• Documentation
• Software CD

Click Here for an Owner's Manual and Installation Guide for this Product (14.02 MB)