Racor Turbine 500FG Fuel Filter/Water Separator Assembly - 500FG2

Features:

• The Racor 500FG Turbine Diesel fuel filter/water separator protects the precision components of your engine from dirt, rust, algae, asphaltines, varnishes and especially water, which is prevalent in low distillate fuels.
• Turbine Series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and protection against precision engine components from dirt
• Contaminants are removed from fuel using the legendary three stage process described below
• Separation: Using the fuel flow, the stationary turbine separates large solids and free water through enhanced centrifugal force
• Coalescing: Smaller water droplets and solids coalesce on the conical baffle and fall into the collection bowl.
• Filtration: Engines will benefit from near 100% water separation and fuel filtration with Racor's proprietary Aquabloc® water repelling media
• Replaceable filters are available in 2, 10, and 30 micron ratings (Sold Separately)

Specifications:

• Applications: Diesel only
• Maximum flow rate: 60 GPH (227 LPH)
• Water removal efficiency: 99%
• Includes an Aquabloc 2 micron filter element and see-through bowl
• Port Size: 3/4"-16 UNF (SAE J1926) (Port fittings sold separately)
• Maximum working pressure: 25 PSI (1.7 bar)
• Clean pressure drop: 0.25 PSI (1.7 kPa)
• Ambient temperature range: -40° to +255° F (-40° to +121° C)
• Fuel temp: 80° to 190° F (27° to 88° C
• Dimensions: 11.5" High x 5.8" Wide x 4.8" Deep
• Service Clearance
• Above Assembly: 5.0" (12.7 cm)
• Below Assembly: 2.0" (5.1 cm)

Installation Guide