Prop Guard Propeller Guard

Prop Guard is made to surround the propeller like a nozzle. This designed nozzle action moves water with a controlled directional force which gives the boat improved handling and more power. This nozzle action is accomplished with no moving parts to adjust or replace. Whether you have an outboard or stern drive, Prop Guard will increase propeller efficiency, decrease fuel consumption and improve boat handling while reducing hull and engine stress. Technical testing of the Prop Guard has proven that the performance of pleasure crafts are actually enhanced by the installation of the Prop Guard.

Features:

• For use with your outboards and stern drives
• Two piece, plastic, injection molded cage designed to completely cover the propeller like a nozzle
• Nozzle action moves water with a controlled directional force accomplished with no moving parts to adjust or replace
• Attaches with a specially designed clamp system and bolts included in package
• Two halves are attached like a clam shell to the cavitation plate and the skeg of any outboard or stern drive motor
• No moving parts, no electrical wiring, and no hydraulic hoses
• Manufactured to rigid specifications from state-of-the-art polypropylene
• Installation can be accomplished by anyone with simple tools in about 20 minutes

9" Prop Guard:

• 9" Prop Guard (Safety Yellow) fits 9.9 HP to 20 HP (except Big Foot and High Thrust, Require 11")
• Fits Mercury, Yamaha, Honda, BRP, Suzuki
• 9.9 HP to 20 HP
• For propellers up to 8.5"

11" Prop Guard:

• 11" Prop Guard (Safety Orange) fits 25 HP to 35 HP (except Big Foot and High Thrust, Require 13")
• Fits Mercury, Yamaha, Honda, BRP, Suzuki
• 25 HP to 35 HP motors
• For propellers up to 10.5"

13" Prop Guard:

• 13" Prop Guard (Safety Blue) fits 40 HP to 65 HP (except Big Foot and High Thrust, Require 14")
• Fits Mercury, Yamaha, Honda, BRP, Suzuki
• For pontoon, deck boats, and any other application that the vessel does not exceed 25 mph
• 40 HP to 65 HP motors

14" Prop Guard:

• 14" Prop Guard (Safety Red) fits 70 HP to 100 HP (except Big Foot and High Thrust, Require 16")
• Fits Mercury, Yamaha, Honda, BRP, Suzuki
• For pontoon, deck boats, and any other application that the vessel does not exceed 25 mph
• 70 HP to 109 HP motors
• For propellers up to 13.5"

16" Prop Guard:

• 16" Prop Guard (Safety White) fits 110 HP to 350 HP (All Stern Drives and Volvo Dual)
• Fits Mercury, Yamaha, Honda, BRP, Suzuki and Mercruiser
• 110 HP to 350 HP motors
• For propellers up to 16"

Installation Notes:

• Prop Guards will fit all Manufacturers Outboards and Stern Drives. Note:
• To obtain optimal performance out of your motor with the Prop Guard installed, you may need to change your propeller diameter: 9" Prop Guard up to 8.5" prop, 11" Prop Guard up to 10.5" prop, 14" Prop Guard up to 13.5" prop, and 16" Prop Guard up to 16" prop
• The closer the prop blades are to the Prop Guard rings, it will optimize your performance, handling and will not create a drag. Your motor will also have to be trimmed to a setting of optimal performance
• Be sure the Prop Guard you purchase is the correct size. Place it on your motor with Grip Clamps first and CHECK YOUR CLEARANCES BEFORE DRILLING HOLES AND MOUNTING
• Manufacturer will not warrant your Prop Guard should you drill into Prop Guard and find you have purchased the wrong size
• Above all, please take your time in measuring and selecting the proper size Prop Guard

Notes:

• All HP's with Big Foot and High Thrust applications require next size up
• All applications of the 13" and 14" Prop Guards are for pontoon and deck boats and any other application that the vessel does not exceed 25 mph

Prop Guard Application Guide

Prop Guard Installation Guide