Pettit Vivid Antifouling Paint

Pettit Vivid delivers excellent multi-season, dual biocide antifouling protection and high performance in a range of clean, bright colors.

Features:

• Hybrid technology offers all the advantages of ablative and hard paints
• Dual-biocides provide excellent multi-season protection under all conditions
• Withstands trailering and is easily burnished to a high performance, super-slick racing finish
• Applied in thin coats, Vivid resists buildup and can be hauled and launched without loss of protection
• Can safely be used on aluminum hulls and outdrives when used with the recommended priming system
• Suitable for below the waterline only

Specifications:

• Color: Blue
• Finish: Flat
• Solids by Weight: 83%
• Coverage: 440 ft ²/gal
• VOC: 330 g/L (max)
• Biocide: Cuprous Thiocyanate 25.0%, Zinc Pyrithione 2.80%
• Flash Point: 110° F (SETA)
• Application Method: Brush, roller, airless or conventional spray
• Maximum Roller Thickness: 3/16"
• Number of Coats: 1 Minimum per season with additional coats for extended service
• Wet Film Thickness: 3.1 mils
• Dry Film Thickness: 2 mils
• Application Temperature: 50° F. Min. / 90° F. Max.
• Thinner: 120 Brushing thinner, 121 spraying thinner, or 120VOC thinner
• Water-Based: No
• Components: 1
• Dry time: (Hours) Substrate temperature must be at least 5° above dew point
  • 90° - 4 to recoat, 16 to launch
  • 70° - 8 to recoat, 24 to launch
  • 50° - 16 to recoat, 48 to launch

Note: The above dry times are minimums. Vivid may be recoated after the minimum time shown. There is no maximum dry time before launching.

See Data Sheet for This Product

SDS