Pettit Tuff Coat Rubberized Non-Skid Coating

Pettit's Tuff Coat Non-Skid Coating is a state-of-the art, single component, water-based solution designed to provide a highly durable and impact-resistant, textured surface for boats, yachts, decks and docks.

Features:

• Marine grade formula designed to reduce slippage
• Exceptionally easy one-part application
• Soap and water clean-up
• Highly durable, impact resistant and easy to clean
• Created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules
• Excellent for concrete, masonry, fiberglass, wood, and previously painted substrates
  • May be used in areas of full submersion should an application be desired
• Powerful UV filters allow for coating in direct or indirect sunlight without fading, peeling or breaking down
• Improves existing non-skid finishes from boat manufacturers
• Flexible finish dries to 30-35 mils of thickness creating a finish that hides imperfections
• Low odor product - must be applied with a Tuff Coat textured roller or low-pressure hopper spray gun (sold separately)
• Suitable for above and below the waterline

Specifications:

• Container size: Gallon
• Vehicle type: Urethane acrylic
• Components: 1
• Solids by weight: 47%
• Solids by volume: 38%
• Coverage: 40 sq. ft. /gal @ 2 coats
• VOC: 53 grams/liter
• Flash point: 196° F
• Application method: Tuff Coat roller or low-pressure hopper spray gun
• Maximum roller thickness: Tuff Coat roller only (9" P9001 or 4" P4002)
• Number of coats: 2
• Wet film thickness: 40-48 mils (per coat)
• Dry film thickness: 15-18 mils (per coat)
• Application temperature: 40° F Min / 90° F Max
• Thinner/cleaner: Water
• Dry time: Minimum time in hours
  • 90° F: 1/2 to touch, Dry to touch to recoat
  • 70° F: 1 to touch, Dry to touch to recoat
  • 50° F: 2 to touch, Dry to touch to recoat

Product Data Sheet

SDS