Pettit Trinidad HD Antifouling Bottom Paint

Trinidad HD provides excellent, long lasting protection, even under the toughest antifouling conditions. Its durable, hard, modified epoxy finish has excellent adhesion, and is highly abrasion resistant. A good choice for powerboat or sailboat use in tropical and other warm waters where extreme fouling exists.

Features:

• Multi-season, hard antifouling paint
• Fast-dry technology
• High copper load offers excellent performance in all conditions
• Excellent adhesion to fiberglass, wood and steel hulls
• Hard, durable finish for long-lasting performance
• Covered by HD (Hull Defense) 18 Month Limited Warranty
• Suitable for below the waterline only

Specifications:

• Container Size: Gallon
• Finish: Flat
• Solids by Volume: 82 +/- 2%
• Solids by Weight: 85 +/- 2%
• Coverage: 450 ft ²/gal. (roller applied)
• VOC: 330 g/L (max)
• Biocide: Cuprous Oxide 53.3%
• Flash Point: 115° F (SETA)
• Application Method: Brush, roller, airless or conventional spray
• Maximum Roller Thickness: 3/8"
• Number of Coats: 2
• Wet Film Thickness: 3.4 mils
• Dry Film Thickness: 2 mils
• Application Temperature: 40° F Min. / 90° F Max.
• Thinner: 120 VOC Thinner (Max 10%)
• Water-Based: No
• Components: 1
• Dry Time: Minimum time in hours
  • 90° F - 1 to Recoat, 2 to Launch
  • 70° F - 2 to Recoat, 4 to Launch
  • 40° F - 12 to Recoat, 24 to Launch

Do not apply Trinidad HD on aluminum hulls or outdrives

Product Data Sheet (2.89 MB)

SDS