Pettit
Pettit Hydrocoat Eco Antifouling Bottom Paint
Item: #877343 | Part Number: Not Selected$121.99 - $359.00
Description
- Copper-free, water-based ablative bottom paint
- High-level Econea biocide plus slime inhibitor for multi-season protection
- Low-VOC formula with easy soap-and-water cleanup
- Compatible with most substrates and existing bottom paints
Pettit Hydrocoat Eco Antifouling Bottom Paint Item # 877343
Description
Pettit Hydrocoat Eco is Pettit's exclusive water-based, co-polymer ablative family of bottom paints with the highest level of metal-free Econea biocide available. This is combined with a powerful slime fighting inhibitor to provide unprecedented multi-season protection in the toughest marine environments
Features:
- Water-based, copper-free, self-polishing ablative antifouling paint
- Dual-biocides provide outstanding multi-season protection in all conditions
- Innovative Hydrocoat Technology replaces the harsh solvents found in most bottom paints with water
- Makes for an easier application and clean up
- Low VOC's, and no heavy solvent smell
- Co-polymer ablative paint film wears away with use allowing for a controlled release of biocides
- Eliminates paint build up and the need for sanding between coats
- Copper-free formula is compatible over almost all bottom paints
- Safe for use on all substrates including steel and aluminum
- Will not lose effectiveness when removed from the water
- Dual-biocides provide outstanding multi-season protection in all conditions
- Uses the power of organic Econea for better protection and a greener Earth
- Easy application and cleanup with soap & water
- Suitable for below the waterline only
Specifications:
- Finish: Flat
- Solids by Weight: 73%
- Coverage: 430 sq. ft./gal
- VOC: 150 grams/liter (max)
- Biocides:
- Econea (Tralopyril): 6.0%
- Zinc Pyrithione: 4.8%
- Flash Point: None
- Application Method: Brush, roller, airless or conventional spray
- Number of Coats: 2 minimum per season with additional coats at waterline
- Dry Film Thickness: 1.4 mils
- Application Temp: 50° F. min. / 90° F. max.
- Thinner: Clean fresh water
- Water-Based: Yes
- Components: 1
- Minimum Dry Times (hours):
- Degrees = Hours to touch / Hours to recoat / Hours to launch
- 90° F = 1/4 hour / 1-1/2 hours / 12 hours
- 70° F = 1/2 hour / 3 hours / 16 hours
- 50° F = 1 hour / 6 hours / 48 hours
- Degrees = Hours to touch / Hours to recoat / Hours to launch