Pettit
Pettit Aerosol Prop Coat Barnacle Barrier Grey - 20 oz - 1792
Item: #877245 | Part Number: 1792$34.99
Description
- High-zinc formula for superior corrosion and barnacle protection
- Self-cleaning barrier that bonds to all bare underwater metals
- Fast-drying, easy spray application for above- and below-waterline use
- Protects aluminum, steel, stainless, bronze, copper, and more
Pettit Aerosol Prop Coat Barnacle Barrier Grey - 20 oz - 1792 Item # 877245
Description
Pettit Aerosol Prop Coat Barnacle Barrier provides excellent protection for running gear and bare metals; forming an excellent bond that inhibits corrosion and self-cleans during service.
Features:
- Underwater metal corrosion protection
- Forms an excellent bond to underwater metals and running gear
- Contains the highest concentration of pure Zinc
- Easy-to-use, fast drying formula
- Provides protection for all bare metals including aluminum, steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead
- Self cleans during service
- Suitable for above and below the waterline
Specifications:
- Size: 20 oz
- Color: Grey
- Finish: Flat
- Curing Mechanism: Solvent release
- Coverage: 10 sq. ft. 20 oz. Aerosol
- VOC: 60% max
- Application Method: Spray
- Number of Coats: 2 - 3
- Dry Film Thickness per Coat: 1.5 mils
- Application Temperature: 50° F min / 90° max
- Cleanup: 120 Brushing thinner
- Water-Based: No
- Components: 1
- Dry Time: Minimum time in hours
- 90° F - 1/2 to recoat, 16 to launch
- 70° F - 1 to recoat, 24 to launch
- 50° F - 2 to recoat, 48 to launch
Directions for Use:
- Shake can vigorously for at least two minutes after mixing balls begin to rattle. Shake often during use
- Hold can upright 8" - 12" from the surface and spray in a steady back-and forth motion, slightly overlapping each stroke
- Keep the can the same distance from the surface and in motion while spraying
- Apply in thin coats and allow no more than 5 minutes between two or three thin coats. Otherwise, allow to dry for one hour before applying additional coats
- When finished spraying, clear spray valve by turning can upside down and spraying until no more paint comes out
- If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other object in the stem
Part Numbers for Pettit Aerosol Prop Coat Barnacle Barrier Grey - 20 oz - 1792
Videos
Videos
Reviews
Rated 1 out of
5
by
Jon-Paul from
Very poor spray nozzle
The nozzle clogged almost instantly and more than half the can went to waste.
Date published: 2025-05-05
Rated 1 out of
5
by
Not Happy from
Not the best
I applied Pettit Prop Coat to my trim tabs over the winter. I followed the instructions and applied three, thin coats. The can sprayed well and the product went on flat and smooth. Unfortunately, only five weeks into our New England boating season and the trim tabs covered with Prop Coat are the ONLY surfaces on my boat that are completely loaded with small barnacles.
The props are painted with propspeed, I useTrilux33 on the drives and the hull is painted with SeaHawk Cukote. All are completely free of growth.
Date published: 2025-06-14
Rated 5 out of
5
by
Jeremy from
Easy application
This product offered quite easy application. After some masking, I applied it in several thin coats, preceded by long and vigorous shaking per the directions. It delivered a visually smooth, high-quality coating for my feathering bronze prop and bronze shaft. I applied before painting the hull, so any overspray (I did mask the hull) would be sanded and covered when applying antifoul.
All of this said - we will see this fall at haul-out how effective the product is.
Date published: 2024-07-04
Rated 1 out of
5
by
Frank from
Petit barnicle barrier
Despite using an electric shaker, 3 cans stopped spraying while still 80% full. Product works great if you can get it out of the can
Date published: 2023-05-17
Rated 5 out of
5
by
Rich from
Barnacle Protector
Excellent product. Hardly a barnacle when hauled.
Date published: 2023-05-16