Pettit 1793 Aerosol Transducer Paint - 1793SP

Pettit's 1793 Aerosol Transducer Paint is designed for use only on plastic transducer housings and bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater plastic housings and metals, and inhibits corrosion on these surfaces.

Features:

• Superior transducer and underwater metal protection
• Forms an excellent adhesive bond to underwater plastic housings and metals, and inhibits corrosion on these surfaces
• Self-clean in service
• Dried film contains 93% pure zinc
• Excellent adhesion to clean metals and plastic transducer housings
• Fast dry formula in an easy to use aerosol spray can
• Suitable for above and below the waterline

Specifications:

• Color: Gray
• Finish: Flat
• Curing Mechanism: Solvent release
• Coverage: 5 sq. ft/6 oz. spray can
• VOC: 60% max
• Method: Aerosol spray
• Number of Coats: 2 or 3
• Dry Film Thickness per Coat: 1.5 mils
• Application Temperature: 50° F. Min. / 90° F. Max.
• Application Humidity: 0% RH min. 85% RH max.
• Cleaner: 120 Brushing thinner
• Water-Based: No
• Components: 1
• Dry Time (in hours):
  • 90° F: 1/2 to recoat, 16 to launch
  • 70° F: 1 to recoat, 24 to launch
  • 50° F: 2 to recoat, 48 to launch

Note: Do not apply more than three coats as cracking and loss of adhesion may occur if product is applied too thick or in too many coats.

Pettit 1793 Aerosol Transducer Paint Product Data Sheet

Safety Data Sheet - Part A

Safety Data Sheet - Part B