Octopus Autopilots Hydraulic Linear Actuator

The Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.

Features:

• For power and sailboats with mechanical steering
• Recommended for vessels up to 45 feet
• This drive is compatible with most of the major Autopilot Electronic brands
• When the autopilot is not in use the cylinder runs freely along with the rudder
• When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder
• Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth
• De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder
• The actuator has a small translucent oil reservoir, making it easy to check fluid levels
• These actuators have only five moving parts
• Mechanical simplicity gives Precision Products reliability and ease of service when compared to complicated gear and screw actuators, making Precision Products units a favorite for offshore mariners
• These actuators are shipped from their factory completely filled with oil and require no additional plumbing

Specifications:

• Average current: 4-6 Amps
• Power: 12V DC
• Cylinder bore: 38mm
• Peak thrust: 882 lbs
• Max boat length: 45 feet