Item #874302

Maretron Pressure Transducer

$146.99 - $193.99
$142.19 - $192.99
10% off
          Want an email once available?
          Buy with

          Image of : Maretron Pressure Transducer Maretron Pressure Transducer Item # 874302

          Description

          The Maretron pressure transducer is to be used with the FPM100 Fluid Pressure Monitor (sold separately). For maximum accuracy, you should always use the transducer with the smallest range that is sufficient for your application.

          All pressure transducer accessories for the FPM100 are fitted with 1/4" NPT male threads.

          Some pressure transducers measure gage pressure (pressure above atmospheric). These transducers have a small plastic vent tube enclosed in the connecting cable. Special care must be taken not to block or kink the vent tube, and not to expose the vent tube to moisture.

          Keep in mind that the rated burst pressure of the pressure transducer is 2.4 to 3 times the maximum measurement pressure of the transducer. If the pressure transducer will experience pressure spikes in excess of the transducer's maximum measurement pressure, use of a Pressure Snubber (PT-SNUB-01) accessory is highly recommended. The snubber will dampen pressure spikes that will be seen by the pressure transducer.

          Specifications:

          • Operating Temperature: -40°C to 105°C
          • Storage Temperature: -40°C to 105°C
          • Proof Pressure: 2.4 × Full Scale
          • Burst Pressure: 2.4 × Full Scale
          • Reverse Voltage Protection:± 16V over 5 Minutes
          • Construction: 304L stainless steel
          • Pressure/Temperature Cycles: 0 to FS @ 8Hz; and 40°C to 105°C for > 1.8x106 cycles
          • Thermal Shock: 105°C to 40°C, 0.5 hr soaks at Temp. (2s Transfer) for 300 cycles
          • Vibration: 100 to 2000 Hz, 20g Sinusoidal, 3 Axes for 144 hours
          • EMC Compatibility: 10V/meter per EN 61000-4-3
          • Humidity: 85°C

          Specifications:

          • 0 to 3 PSI/0.21 bar (PT-0-3PSI-01)
            • Accuracy: ±2% Full Scale
            • Type: Gauge
          • 0 to 5 PSI/0.34 bar (PT-0-5PSI-01)
            • Accuracy: ±2% Full Scale
            • Type: Gauge
          • 0 to 10 PSI/0.69 bar (PT-0-10PSI-01)
            • Accuracy: ±2% Full Scale
            • Type: Gauge
          • 0 to 50 PSI/3.45 bar (PT-0-50PSI-01)
            • Accuracy: ±1% Full Scale
            • Type: Gauge
          • 0 to 100 PSI/6.89 bar (PT-0-100PSI-01)
            • Accuracy: ±5% Full Scale
            • Type: Gauge
          • 0 to 500 PSI/34.47 bar (PT-0-500PSI-01)
            • Accuracy: ±5% Full Scale
            • Type: Absolute
          • 0 to 1000 PSI/68.95 bar (PT-0-1000PSI-01)
            • Accuracy: ±5% Full Scale
            • Type: Absolute
          WARNING

          This product can expose you to chemicals including Nickel (Metallic) which are known to the State of California to cause cancer, birth defects or other reproductive harm.

          For more information go to www.p65warnings.ca.gov.

          Part Numbers for Maretron Pressure Transducer

          Reviews

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getReviews, 32.68ms
          • REVIEWS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;

          Questions

          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getContent, 28.42ms
          • QUESTIONS, PRODUCT
          • bvseo-msg: HTTP status code of 404 was returned;