Item #874205

Maretron Fluid Pressure Monitor - FPM100-01

$401.99
Want an email once available?
Buy with

Image of : Maretron Fluid Pressure Monitor - FPM100-01 Maretron Fluid Pressure Monitor - FPM100-01 Item # 874205

Description

The Maretron Fluid Pressure Monitor FPM100 is used to adapt up to six pressure transducers to a NMEA 2000® network, allowing you to observe fluid pressures and tank levels anywhere aboard where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters.

The FPM100 also has a tank level mode, enabling fluid levels in a tank to be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000® network. This allows you to monitor the fluid levels in tanks that are extremely deep, have internal structures, or are otherwise not suited for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so that you know the true level of the tanks.

The FPM100 is NMEA 2000® certified so you can view any and all information anywhere on the vessel using a compatible NMEA 2000® display. The FPM100 is a key component of Maretron's N2KView® vessel monitoring and control system.

Note: Pressure transducers sold separately

Applications:

  • Water Pressure
  • Atmospheric Pressure
  • Compressed Air Pressure
  • Hydraulic Pressure
  • Steam Pressure
  • User Defined Pressure Sources
  • Fuel Tank Level / Volume Remaining
  • Fresh Water Tank Level / Volume Remaining
  • Waste Water Tank Level / Volume Remaining

Features:

  • NMEA 2000® interface
  • Adapts up to six pressure transducers to the NMEA 2000® network
  • Each channel is independently programmed to match pressure transducer characteristics
  • Each channel independently programmed in pressure/vacuum mode or tank level mode
  • In Pressure Mode:
    • Can report programmable pressure sources including Water Pressure, Atmospheric Pressure, Compressed Air Pressure, Hydraulic Pressure, Steam Pressure, or User Defined pressure sources.
  • In Tank Level Mode:
    • Pressure transducer allows use in extremely deep or irregularly shaped tanks that can't be sensed using other technologies
    • 16 programmable tank types including Fuel, Fresh Water, Waste Water
    • Programmable tank number(s) up to 16 per tank type
    • Programmable tank capacity
WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.

Part Numbers for Maretron Fluid Pressure Monitor - FPM100-01

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.49ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.12ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;