JL Audio AP Series Compact Marine Amplifier

The JL Audio AP Series compact marine amplifiers deliver powerful, efficient performance in a rugged, space-saving design built for marine environments. Featuring advanced Class-D technology and IP67-rated construction, these amplifiers provide reliable audio performance while withstanding harsh conditions on the water.

Features:

• Compact Class-D amplifier design for high efficiency and reduced battery draw
• IP67-rated construction for protection against water and dust (excluding cables)
• Ignition-protected for safe marine installation
• Easy Tune feature when paired with compatible Fusion stereos and app
• Built-in LCD for simplified setup and control (select models)
• User-selectable high-pass and low-pass filters for system tuning
• Protection circuits for voltage, temperature, and short circuit conditions

Specifications:

• Amplifier Class: Class D
• Operating Voltage: 9 - 16V DC
• Water Rating: IP67 (excluding cables)
• Operating Temperature: -4°F to 149°F (-20°C to 65°C)
• Input Sensitivity: 200 mV - 8V RMS (switchable)
• Input Impedance: 11 kΩ (high), 20 kΩ (low)
• Signal-to-Noise Ratio: >70 dB
• Protection: Over/under voltage, over temperature, output short circuit
• Recommended Fuse Types: AFS, AGU, or MaxiFuse
• Minimum Power/Ground Wire: 4 AWG
• Warranty: 3 years
• 1-Channel (AP300/1):
  • Channels: 1
  • Dimensions (L x W x H): 10.43" x 4.90" x 1.86" (265 x 125 x 47 mm)
  • RMS Power @ 4 Ohm: 200W x 1
  • RMS Power @ 2 Ohm: 300W x 1
  • Frequency Response: 10 - 500 Hz
  • Current Consumption (Idle): 700 - 750 mA
  • Fuse Rating: 35A
  • Filters: Low-pass, 20 - 500 Hz
  • Infrasonic Filter: 20 Hz - 50 Hz (Defeatable)
• 4-Channel (AP300/4 - No Bluetooth):
  • Channels: 4
  • Dimensions (L x W x H): 10.43" x 4.90" x 1.86" (265 x 125 x 47 mm)
  • RMS Power @ 4 Ohm: 50W x 4 / 150W x 2 (Bridged)
  • RMS Power @ 2 Ohm: 75W x 4
  • Frequency Response: 20 Hz - 20 kHz
  • Current Consumption (Idle): 700 - 750 mA
  • Fuse Rating: 35A
  • Filters: High-pass / Low-pass, 20 - 500 Hz
• 4-Channel with Bluetooth (AP200/4BT):
  • Channels: 4
  • Dimensions (L x W x H): 7.28" x 4.90" x 1.85" (185 x 125 x 47 mm)
  • RMS Power @ 4 Ohm: 40W x 4 / 100W x 2 (Bridged)
  • RMS Power @ 2 Ohm: 50W x 4
  • Frequency Response: 20 Hz - 20 kHz
  • Current Consumption (Idle): 700 - 750 mA
  • Fuse Rating: 35A
  • Bluetooth: Yes (with included remote)
• 6-Channel (AP600/6):
  • Dimensions (L x W x H): 11.81" x 5.90" x 1.86" (300 x 150 x 47 mm)
  • RMS Power @ 4 Ohm:
    • Channels 1-4: 50W x 4 / 150W x 2 (Bridged)
    • Channels 5-6: 100W x 2 / 300W x 1 (Bridged)
  • RMS Power @ 2 Ohm:
    • Channels 1-4: 75W x 4
    • Channels 5-6: 150W x 2
  • Frequency Response: 20 Hz - 20 kHz
  • Current Consumption (Idle): 1000 - 1500 mA
  • Fuse Rating: 70A
  • Filters: High-pass / Low-pass, 20 - 500 Hz
  • Infrasonic Filter: 20 Hz - 50 Hz (Channels 5-6)

Included:

• (1) x JL Audio AP Series amplifier (based on selection)
• (4) x Mounting screws
• (1) x Documentation

Installation Instructions (AP300/AP600)

Installation Instructions (AP200/4BT with Bluetooth)