Jabsco Radial Flexmount Ventilation Blower

The Jabsco Flexmount Blowers provide high volume air intake or extraction and are primarily intended for intermittent duty cycles. This type of mount enables the outlet to adjust 360-degrees.

Features:

• Provides high volume air intake or extraction
• Primarily intended for intermittent duty cycles
  • May be used for longer duty cycles but the maximum motor life is approximately 1,000 hours
• Flexmount allows 360-degree adjustable outlet
• Slip-on inlet and outlet ducting connections
• Dimensionally stable, quiet running Delrin rotors
• Corrosion resistant materials throughout
• Ignition protected: DC models comply with USCG 183.410 and ISO 8846 MARINE
• AC models are not ignition protected and do not comply with ISO 9097
• DC models are listed as NMMA type Accepted and comply with ISO 9097 MARINE (requirements for measuring airflow of fans intended for use in engine compartments, similar spaces)
• Jabsco recommends keeping blowers away from areas exposed to direct heat exceeding 130°F (55°C)

12V/105 CFM Blower

• Ducting Connection: 3" (75 mm)
• Dimmensions (L x H x W): 6 3/4" x 5 1/2" x 5" (170 x 140 x 130 mm)
• Fuse Size: 6A

12V/140 CFM Blower

• Ducting Connection: 3" (75 mm)
• Dimmensions (L x H x W): 8" x 9" x 8 1/4" (220 x 230 x 220 mm)
• Fuse Size: 10A

12V/250 CFM Blower

• Ducting Connection: 4" (100 mm)
• Dimmensions (L x H x W): 9 1/8" x 9 5/8" x 9 3/16" (230 x 250 x 240 mm)
• Fuse Size: 12A

24V/150 CFM Blower

• Ducting Connection: 3" (75 mm)
• Dimmensions (L x H x W): 8" x 9" x 8 1/4" (220 x 230 x 220 mm)
• Fuse Size: 5A

24V/250 CFM Blower

• Ducting Connection: 4" (100 mm)
• Dimmensions (L x H x W): 9 1/8" x 9 5/8" x 9 3/16" (220 x 230 x 220 mm)
• Fuse Size: 7.5A

Note: Actual blower may vary slightly from images shown.

Data Sheet