Jabsco Oil Changer with Multi-Valve Manifold
$695.99 - $717.99
Jabsco Oil Changer with Multi-Valve Manifold Item # 871032
Description
Features:
- The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps
- The manifold is factory fitted with (3) Ball Valves to serve three different oil reservoirs
- May be fitted with (2) Additional Ball Valves to drain up to (5) oil reservoirs
- The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission
- Each connection to an engine is controlled by a dedicated full flow ball valve
- The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system
- It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open
- Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position
Specifications:
- Body: Bronze
- Impeller: Nitrile
- Seal: Buna Lip Type
- Motor: Reversible Permanent Magnet With Integral Reversing Switch
- Complies with USCG 183.410 and ISO 8846 MARINE (ignition protected)
- Valves: 1/2" NPT Full Flow Ball Type
- Height: 6-1/4" (15.9 cm) Including the height of the 1-1/8" (30 cm) tall Switch Guards
- Length: 10-7/8" (27.6 cm)
- Width: 10-3/16" (26.0 cm)
- Available Models:
- 17820-0024 - 24V, Draw: 8 Amps
- 17820-0012 - 12V, Draw: 15 Amps