Shopping from Canada? 
Go to Defender Canada!
Jabsco Neoprene Impeller Kit - 17370-0001-P
Item: #1011381 | Part Number: 17370-0001-P
The Jabsco Neoprene Impeller Kit 17370-0001-P is designed for reliable marine cooling performance, pumping fresh or salt water with efficiency and durability. Featuring a flexible neoprene impeller with 12 blades, it delivers smooth operation and dependable flow. Regular replacement helps prevent engine overheating and ensures long-term system reliability.
Jabsco Neoprene Impeller Kit - 17370-0001-P Item # 1011381
Description
Jabsco neoprene flexible impellers are best used for pumping fresh or salt water. Use nitrile impellers for pumping water, oily liquids or transferring heavily contaminated water.
Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance
Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces
Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use
Features:
- Material: Neoprene
- Drive Type: Double Flat Drive
- Number of Blades: 12
- Diameter: 3 3/4"
- Shaft Diameter: 3 9/16""
- Shaft Width: 1"