Jabsco CE Commercial Duty Water Puppy Pump

This pump is a highflow, continuously rated bilge pump offering good discharge head. It can be used for bilge pumping, livewell circulation, washdown and general pumping requirements. For intermittent duty use only, motor may be reversed to empty bait tank. The Commercial Duty Water Puppy has 25% more flow than the standard model and a heavy duty motor. Oil resistant nitrile impeller is standard. The Nitrile impeller in this pump is good for oilbased products, and has a temperature limit of 50° to 180° F. The pump must be mounted in a dry location as the motor is not waterproof and must not be submerged. Selection of a cool ventilated location will generally extend pump motor life. The unit can be mounted in any desired position and is best to mount so that water dripping from loose port connection will not wet the motor. The pump head may be rotated 180 deg. on the motor to change the direction of flow.

Features:

• Small bilge debris present no problem to these bronze bodied, flexible impeller pumps
• Simple design means fewer wearing parts
• Adapter for 3/4 " external garden hose thread included
• ISO 8846 MARINE (Ignition protection)
• ISO 8849 MARINE (Bilge pump standard)
• Motor Type: Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump

Specifications:

• Flow rate:
  • 12V (18670-0923): 7.8 GPM
  • 24V (18670-0943): 9 GPM
• Pump body: Bronze
• Shaft seal: Lip Type
• Impeller: Nitrile
• Internal pipe threads: 1/2" NPT
• External hose barb: 1"
• Dimensions: 3" x 4 3/4" x 6 7/8"

Owner's Manual