Item #870764

Isotherm 2301 Compact Classic Air Cooled Refrigeration Component System - U150X000R11111AB

41 Review
$1,030.00
$927.00
10% off

Only compatible with Model XA extension tube sets; item #872073. Model XA tube set couplings have red and yellow plastic caps.

Want an email once available?
Buy with

Image of : Isotherm 2301 Compact Classic Air Cooled Refrigeration Component System - U150X000R11111AB Isotherm 2301 Compact Classic Air Cooled Refrigeration Component System - U150X000R11111AB Item # 870764

Description

The Isotherm Compact Classic Model 2301 is an air cooled refrigeration system that can cool as a refrigerator or as a freezer. The maximum freezer capacity is 1.8 cu.ft. and the maximum refrigerator capacity is 5.3 cu.ft.. It's a fan-cooled compressor unit designed for simple installation in existing top or side-loaded refrigerator boxes. All Isotherm Compact Systems come complete and pre-charged. Each system is rated to refrigerate or freeze a specific volume so there's no guessing what will work best for your boat.

Features:

  • Refrigerator or freezer use
  • Fan-air cooled compressor, electronics and refrigerant
  • 12 / 24V DC Danfoss compressor
  • To simplify the installation, the system is split into two sections:
    • Compressor/condenser unit
    • Evaporator
  • Easy to install with pre-charged system, "Click-on" bracket and quick connect lines
  • Compact footprint, no special plumbing required - can mount on deck or bulkhead
  • Be sure to mount air-cooled compressors in a location that will not trap heat in a closed compartment or in an area will get hot (such as an engine room)
  • It is important that the compressor compartment is well ventilated allowing cool air to enter from below and hot air to escape at the top
  • To archive good operating results, the following is essential:
    • Use polyurethane or similar foam
      • 30 mm (1 1/4") thick for 50 liter (1.8 cu.ft.) boxes
      • 50 mm (2") for boxes up to 80 liter (2.8 cu.ft.) boxes
      • 100 mm (4") or more for larger boxes
    • Battery capacity should be at least of 75 Ah to enable sufficient power to be stored during engine operation
    • All the electrical power supply equipment such as alternator, regulator, cables, connectors and batteries must be kept in good condition
  • Maximum freezer capacity of 1.5 cu.ft. and maximum refrigerator capacity of 5.3 cu.ft.
  • The Isotherm warranty is 2 years from the date of purchase on all components and a 5 year limited warranty on the compressor

Specifications:

  • Maximum Box Volume: 5.3 cu. ft
  • Type: 2301
  • Evaporator: Small-O
  • Dimensions:
    • Evaporator: 12.6" x 3.9" x 9.1"
    • Compressor: 11" x 6" x 6"
  • Power Draw (Amp) Average: 0.7A / 3.5 Hour @ 12V
  • Weight: 20 lbs
  • Danfoss Compressor Model: BD35F
  • Temp Range: Fridge

Part Numbers for Isotherm 2301 Compact Classic Air Cooled Refrigeration Component System - U150X000R11111AB

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.5ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

The connectors on the isotherm compressor show to be mounted towards the fan. Are these rigid mounted or can they be turned to face the other direction.

Asked by: Bruce
Thank you for reaching out to the Defender Team! I would highly recommend reaching out to Isotherm(Indel) to see if this is something that is possible and to also make sure that it doesn't void the warranty. You can reach Isotherm(Indel) directly at (954) 984-8448.
Answered by: RJT Outlet
Date published: 2024-09-06
  • y_2024, m_12, d_1, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_402826, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_defendermarine
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.51ms
  • QUESTIONS, PRODUCT