Isotherm 2050 SP Water Cooled Refrigeration Component System - U125X000L11311AD
$1,226.00
Isotherm 2050 SP Water Cooled Refrigeration Component System - U125X000L11311AD Item # 870763
Description
Create a small refrigerated compartment on your boat with the Isotherm 2050 SP water cooled refrigeration component system. It has all the components you need for a successful installation, It's water cooled and self pumping so the heat exchange occurs in the water, keeping your boat cooler.
Features:
- Isotherm Compact SP 2050 Compact Classic water-cooled with self pumping thru-hull
- Fridge or freezer use
- 12 / 24 V Danfoss / Secop compressor
- Power consumption: 0.7 Amps Hourly (Max: 3.5 Amps)
- Easy installation thanks to "click-on" system
- Self Pumping (SP) system to reduce the noise of a ventilated condenser and reach a very low power consumption
- Evaporator: Large-Flat
- Large "L" Evaporator Dimensions: 16" (400 mm) x 7" (170 mm) x 8" (210 mm)
- Maximum Box Volume: Fridge: 4.4 cu ft (125 liter) / Freezer: 1 (41 liter)
- Optional Universal kit AC / DC optional for a complete power supply compatibility (12 / 24 V, 230 / 115 V and 50 / 60 Hz) (Sold Separately)
- The Isotherm warranty is 2 years from the date of purchase on all components and a 5 year limited warranty on the compressor
Specifications:
- Maximum Fridge Volume: 4.4 (cubic feet)
- Maximum Freezer Volume: 1.5 (cubic feet)
- Evaporator Dimensions: 16 x 7 x 8 (inches)
- Evaporator Shape: L-shaped
- Compressor Dimensions: 8 x 5 x 6 (inches)
- Amps Power Consumption max / hourly: 3.5 / .7 Amps
- Compressor type: BD35F
- Temp range: Fridge or freezer
Part Numbers for Isotherm 2050 SP Water Cooled Refrigeration Component System - U125X000L11311AD
Reviews
Rated 5 out of
5
by
Skipsailing from
Worth the work!
Worth the extra work! Getting the new fitting in was tough and the rest of the install takes care and attention, but as a sailor, hey cold beer.
The instruction manual is not as helpful as it could be and some of the words seemed more like clues or hints than actual how-to. My advice is read it carefully before picking up any tools.
The compressor is quiet and efficient. When my buddy and I finally turned it on it dropped the temp 20 degrees in 20 minutes.
Date published: 2024-06-18
Questions
Is the “self pumping” through hull a keel cooler or is water actually pumped? Also, is it possible to get an evaporator like the one used in the 2501?
The SP is not a keel cooler, it is more like a heat exchanger, the condenser cooling loop is wound inside the SP thru-hull and the heat is transferred to the water outside the boat. The rocking motion of the boat moves water in and out of the thru-hull. This is efficient in water up to 28°C= 82.4°F If you frequent warmer areas, you would need to go with a water pump cooled unit. We can special order the SP 2551 kit with the Large O evaporator. Please email [email protected] for price and availability.
Date published: 2023-11-22