Shopping from Canada? 
Go to Defender Canada!
Interlux
Interlux Sikkens Cetol Marine Wood Finish
Item: #870613 | Part Number: Not Selected$41.34 - $150.99
Description
- Next Wave UV technology for enhanced protection and longevity
- Flexible, breathable finish for above-waterline wood
- Suitable for interior and exterior marine wood surfaces
- Easy brush application with satin, translucent appearance
Interlux Sikkens Cetol Marine Wood Finish Item # 870613
Description
The Cetol® Marine line, with Next Wave™ UV-absorbing technology, is a durable translucent protective wood finish for use above the waterline on interior and exterior woods.
Features:
- Durable translucent protective wood finish
- Use on interior and exterior woods
- Next Wave technology is the next generation of the Cetol Marine line with a unique UV-absorbing package
- Specialty resins and advanced UV absorbers provide greater protection, durability and longevity
- Next Wave technology includes special alkyd resin and high quality synthetic UV-absorbing pigments which shield wood against damaging UV rays and produces an attractive appearance on wood
- Provides a flexible, breathable finish along with weather protection for teak and other hard woods
- Easy application and maintenance
- Suitable for above the waterline only
Specifications:
- Finish: Satin
- Application: Brush
- Specific Gravity: 0.87
- Volume Solids: 28.0%
- Typical Shelf Life: 3 years
- VOC (as supplied): 430 g/lt
- Thinning: Do not thin
- Cleaner: Special Thinner 216
- Compatibility/substrates: Suitable for use on all types of wood including oily timbers such as teak
- Components: 1
Drying Time:
- Touch Dry:
- 23°C (73°F): 4 hours
- Hard Dry:
- 23°C (73°F): 24 hours
- Overcoat:
- 23°C (73°F): 24 hours
Part Numbers for Interlux Sikkens Cetol Marine Wood Finish
Reviews
Rated 5 out of
5
by
Steve from
WOW
Great product and great company. Matched the teak on my boat perfect. Did I say fast shipping!
Date published: 2024-07-02
Rated 4 out of
5
by
Morgan 321 from
Held Up So Far
I used it on a teak board that filled in where the traveler track used to run across the bridge deck. It used 3 coats and let it cure fully between each application. It's been exposed to rain, lots of UV in the northeast and, stepped on many times and it still seems to be good shape, I wasn't so concerned with the grain of the wood showing through but with protecting the wood. It's lasted through one season so far, no worse for wear.
Date published: 2025-10-06
Rated 4 out of
5
by
Where's Dad?? from
Cetol finish on the gunwales. time will tell
used this on my gunwales after three year refinishing job completely failed. used heat gun to remove failing and discoloring finish, 60, 80 then 220 grit and then five coats. looks awesome, but time will be the proof. Went to Cetol to try and avoid the intense stripping in the future required of the previous finish.
Date published: 2025-06-24
Rated 5 out of
5
by
KC of KC from
Sikkens Cetol Marine
Always works well, have used it and other products for years.
Date published: 2024-11-28
Questions
is this an based varnish?
I would call it a varnish that soaks into the wood. It last at least a year and when you want to freshen it up you just sand out any spot that it wore off and put 2 more coast on . Great stuff
Date published: 2025-10-30