Interlux Epoxy Primekote Primer - White

Interlux Epoxy Primekote is a two-part primer that is the recommended primer for use with two-part finishes such as Interlux Perfection® Polyurethane. This primer may be used under all Interlux topside finishes.

Features:

• White, 2-part epoxy primer
• Suitable under all Interlux topside finishes
• Can be used to re-surface cracked and crazed gelcoat prior to the application of topside paint
• Can be used over clear epoxies as a sanding surfacer and to eliminate the effects of amine blush
• Ideal for priming bilge and locker areas
• Application by spray or roller and brush
• Suitable for above and below the waterline

Specifications:

• Type: 2-part epoxy primer
• Color: Bright white
• Finish: Matte
• Mix ratio: 3:1 by volume
• Converter/Curing agent: Interlux Y414
• Shelf life: 2 years
• VOC (as supplied): 407 g/lt
• Components: 2
• Number of coats:
  • Above the waterline: 1-2
  • Below the waterline: 5-6
• Coverage (theoretical):
  • Brush: 450 sq. ft. / Gal
  • Spray: 375 sq. ft. / Gal
• Recommended DFT per coat: 2 mils dry
• Recommended WFT per coat: 3.6 mils wet
• Application methods: Airless spray, brush, conventional spray, roller

Drying Time:

• Touch Dry:
  • 50°F (10°C): 3 hours
  • 59°F (15°C): 2.5 hours
  • 73°F (23°C): 2 hours
  • 95°F (35°C): 1 hour
• Overcoat:
  • 50°F (10°C): 12 hours
  • 59°F (15°C): 10 hours
  • 73°F (23°C): 8 hours
  • 95°F (35°C): 6 hours

Notes:

• Read instructions / data sheet before applying this primer. Epoxy Primekote must be thinned before its application
• Do not apply over 1-part paints

Data Sheet

SDS A

SDS B