Shopping from Canada? 
Go to Defender Canada!
Hella Marine Tri-Color All-Round/Anchor Navigation Light - 002984601
$128.99
Hella Marine Tri-Color All-Round/Anchor Navigation Light - 002984601 Item # 869324
Description
The Hella marine Tri-Color / Anchor Navigation Light (002984601) has the red, green, and white navigation light lenses in one housing located above a 360 degree white anchor / all-around light. It is designed to be mounted on a horizontal surface, typically on the top of a mast. Both lights are visible a minimum of 2 nautical miles away and the fixture has a bayonet mount so the bulbs are easily accessed for replacing.
Features:
- Tri-color navigation light with integrated all-round / anchor light for attachment to yacht masts
- Nonmagnetic and saltwater resistant
- Housing includes bayonet lock for easy bulb change
Specifications:
- Light Color(s): Tri-color / white
- Visibility: 2 NM (port / starboard), 2 NM (stern), 2 NM (all-round / anchor)
- Mounting: Horizontal surface mount
- Housing Color: Black
- Operating Voltage: 12V DC
- Power Consumption: 25W
- Material: UV and impact resistant plastic housing and lens
- Overall Height: 7.87"
- Protection: IP 55
- Approvals: IMO COLREG, BSH, USCG, RINA, ABYC A-16, CE
Part Numbers for Hella Marine Tri-Color All-Round/Anchor Navigation Light - 002984601
Reviews
Rated 1 out of
5
by
Slim from
dont buy this thing
had to put it in a vice to remove the white lens from the base. one plastic tab broke, had to literally break it to get it apart. the wires only enter from the bottom. how you gonna wire this on a masthead?? very cheap quality, worse design, stay away and save yourself a headache
Date published: 2025-04-22
Questions
What size wire is needed for this light?
The light is only 25 watts so 16 gauge is more than sufficient. You should study the attached 12v DC wire gauge chart for future installs.
Date published: 2025-05-30
Is light L. E. D.
No, this light is incandescent.
Date published: 2024-04-03
Do you sell the housing separately? If so, do you have the dimensions for that?
the packaging shows the light with a standoff base. the PICTURE ON THE BOX. you are misleading customers and false advertising this light
Date published: 2025-04-23
does this require three wires?
Yes and no ..... yes if you run a ground all the way down the mass i ran 2 wires and grounded it to the maas at the top then placed a ground fire on the bottom .....
Date published: 2024-01-10
Does it come with everything I need? A.E base, light bulbs? So all I have to do is go up and switch from my old aqua signal
Yes it comes with a base that has to be attached
Mine was the same mounting and wiring
Comes with a cover for storage
Only thing different was having to remove bulb to store
Date published: 2024-08-26
Can it accept a 24 volt bulb of the same size and could it accept an LED 24 volt bulb of the same size?
The unit was designed for incandescent lights, which emit a great deal more heat and consume more energy than LEDs. LED bulbs with the proper base and lumens requirements should be readily available in 24 volts. I am using aftermarket LED's (12 volt to match my boat's electrical system) and the unit works very well. It would be well to ensure that the LED selected has a built-in driver and voltage regulator (as most do these days) to ensure that the light can handle up to 30 volts line voltage. These voltages can be seen on the house DC supply when operating with a bulk charge source in process.
Date published: 2025-04-23