Fusion Apollo Monoblock Marine RMS Single-Channel Amplifier - 650W - 010-02284-15

Add extra power to a system with this 2000W (650W RMS) monoblock amplifier that's specifically designed to power a subwoofer. This efficient, easy-to-install monoblock amplifier works with your compatible Fusion stereo system.

Features:

• Keep the music going for longer without draining your battery as quickly
• No more manual adjustments to your audio settings. The Easy Tune feature does it for you
• A glance at the LED indicators lets you identify if the amplifiers have a short or if they're overheating
• Less distortion and noise, so you enjoy quality audio
• Mounting brackets are included for simple installation
• Don't worry about potential overheating damage with our ignition protection design
• Power & Efficiency: The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650W RMS
• Easy Tune Feature: These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments
• Less Distortion: Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes
• LED Indicators: Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature
• Mounting Brackets: Easily install the amplifiers on board with the included mounting brackets
• Ignition Protected: The ignition-protected design helps prevent potential damage from overheating
• Conformal-Coated PCBS: The amplifier's circuit board has been specially coated to provide extra protection from the marine elements
• 2 OHM Stable: Connect up to two speakers per channel, increasing setup options
• Fusion True-Marine Design: The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV

Specifications:

• Physical Dimensions without Bracket (L x W x H): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
• Physical Dimensions with Bracket (L x W x H): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
• Weight: 4.85 lbs (2.2 kg)
• Water Rating: IPX2
• Amplifier Class: Class-D
• CEA-2006 Power Rating: 650W RMS x 1 @ 14.4V input, 4 ohms, < 1% THD
• Total Rated Power Output, 2 Ohm (Watts): 1100W RMS x 1 @ 14.4V input, 2 ohm < 1% THD
• Peak Power (watts): 2000W
• Input Sensitivity: 2.15V RMS
• Input Impedance: 22k ohm
• Operating Voltage: 10.8V - 16V DC
• Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4V input
• Current Draw, On, No Audio: < 1.15A @ 14.4V input
• Fuse Rating: 125A electronic fuse (no replacement necessary)
• Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30A fast-acting
• Ignition Safety Protected (SAE J1171): Yes
• Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit
• Operating temperature range: 32° to 122° F (0° to 50° C)

Included:

• One Apollo monoblock amplifier
• One mounting bracket
• One power connector
• One speaker connector
• Four 8-gauge, flat-head self-tapping screws
• Four 8-gauge, pan-head self-tapping screws (for mounting bracket)
• Four screw covers
• Fuse holder
• Mounting template
• Installation instructions
• Important safety and product information (ISPI)

Installation Instructions (3.38 MB)