Fusion Apollo 4-Channel Marine Amplifier - 1200W - 010-02284-45

It's The Difference Between Hearing The Music And Feeling It – These efficient, easy-to-install amplifiers work with your compatible Fusion stereo system and let you choose from monoblock, multichannel and zone amplifier options.

1200-Watt 4 Channel Amplifier – This 4 channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.

Features:

• Power And Efficiency — The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel
• Easy Tune Feature — These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments
• Less Distortion — Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes
• LED Indicators — Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature
• Mounting Brackets — Easily install the amplifiers on board with the included mounting brackets
• Ignition Protected — The ignition protected design helps prevent potential damage from overheating
• Conformal-Coated Pcbs — The amplifier's circuit board has been specially coated to provide extra protection from the marine elements
• 2 Ohm Stable — You can connect up to two speakers per channel, increasing setup options
• Fusion True-Marine™ Design — The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV

Specifications:

• Physical dimensions without bracket (LxWxH): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)`
• Physical dimensions with bracket (LxWxH): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
• Weight: 4.85 lb (2.2 kg)
• Water Rating: IPX2
• Amplifier class: Class-D
• CEA-2006 power rating: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD
• Total rated power output - 2 ohm (watts): 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD
• Total rated power output - 4 ohm Bridged (watts): 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD
• Peak power (watts): 1200 watts
• Input sensitivity: 1.6 V RMS
• Input impedance: 22k ohm
• Operating voltage: 10.8 V - 16 V DC
• Current draw, in standby/off using amplifier on wire: < 5 mA @ 14.4 V input
• Current draw, on, no audio: < 1.15 A @ 14.4 V input
• Fuse rating:
  • 4 Channel: 85 A electronic fuse (no replacement neccessary)
  • Power-cable fuse or circuit breaker rating (not included): 40 A
• Power-cable fuse model and rating: Bussmann™ BK/AMI-030 30 A fast-acting
• Ignition Safety Protected (SAE J1171): yes
• Protection circuits:
  • Reverse voltage
  • Input under/over voltage
  • Over temperature
  • Output short circuit
• Operating temperature range: 32° to 122° F (0° to 50° C)

Included:

• One Apollo 4 channel amplifier
• One mounting bracket
• One power connector
• Two speaker connectors with high power mode adapters
• Four 8-guage, flat head self-tapping screws
• Four 8-guage, pan head self-tapping screws (for mounting bracket)
• Four screw covers
• Fuse holder
• Mounting template
• Installation instructions
• ISPI