Shopping from Canada? Go to Defender Canada!
Faria Diesel Tachometer with Magnetic Pickup - 4" - F32803
$123.99
Faria Diesel Tachometer with Magnetic Pickup - 4" - F32803 Item # 865510
Description
Faria® 4" Diesel Tachometer
Features:
- Appropriate for diesel engines with magnetic pickup
- Not for gas engines
- Functions:
- Engine revolutions 0 - 4000 RPM
- Perimeter-lighted black dial with bold white graphics, black aluminum bezel, and flat glass lens
- Engine revolutions per minute displayed by contoured analog pointer on a calibrated dial
- Accuracy: ± 2% of full scale reading
- Fits standard 4" instrument dash mounting hole
- Made in U.S.A
Specifications:
- Faria Model No. 32803
- Input Type: Electronic / analog
- Gauge Size: 4"
- Dial: Perimeter-lighted black dial with bold white graphics, black aluminum bezel, and flat glass lens
- Nominal Voltage: 12V DC
- Current Draw: < 100 mA (without illumination)
- Operating Temperature: -4 to +158° F
- Ingress Protection (gauge front): IP65 (Dustproof / protected against jets of water from all directions)
- Cut-Out: 3-3/8" (85 mm) dia
Part Numbers for Faria Diesel Tachometer with Magnetic Pickup - 4" - F32803
Reviews
Rated 3 out of
5
by
Anonymous from
difficult to fine tune
The tach looks good and gives a stable reading. My gripe is that it is difficult to fine tune. The adjustment screw is under a paper label that needs to be cut and taped over when you're done. It is pretty deep into the hole and difficult to see or judge the size of the socket. The instructions are no help. I tried metric and english allen wrenches from 1.5 mm to about 3/32 in. Somewhere in that range I found one that worked after a fashion. It was still difficult to adjust though with the display changing not at all, then a large amount with small turns of the wrench. I eventually got it withing of 50 rpm of the correct reading. I wouldn't use this model if you need high accuracy.
Date published: 2024-03-29